ECU module programming guide using FDRS

[rugedraw]

The fix for that one module that keeps reporting a soft code for communication issues, or a BC update? ?

Idk, but this is the 3rd truck that reported IPMA and PSCM updates on FDRS tonight. Why not both?

Sponsored

 

[Jesse-Infotainment]

Its the 1.4 update. 2023 so far

 

[Txmade]

Is that the final piece to have full 1.4?

Its the 1.4 update. 2023 so far

 

[Jesse-Infotainment]

Is that the final piece to have full 1.4?

yes

 

[m_bt54]

I thought there would be a little more excitement for this on here. It’s been over 12 hours since it was first mentioned and only a few comments. Maybe it will get a little more attention when (not if!) it hits the 21s and 22s?

 

[Micho523]

yes

Whelp, looks like I'm spending $50 this weekend!

 

[superfordman]

I thought there would be a little more excitement for this on here. It’s been over 12 hours since it was first mentioned and only a few comments. Maybe it will get a little more attention when (not if!) it hits the 21s and 22s?

I was about to pull the trigger and brave the cold and put it on last night, just didn't know since its an IPMA if it's going to be another 2+ hour job or not. Had I known it was 1.4 I would have ran out in the my shorts and started it! I'll try to get it on this afternoon and report back.

 

[rugedraw]

I thought there would be a little more excitement for this on here. It’s been over 12 hours since it was first mentioned and only a few comments. Maybe it will get a little more attention when (not if!) it hits the 21s and 22s?

I assume a lot of people's BC expired and they have nothing to be excited about at this point.

 

[speedracercjr]

I assume a lot of people's BC expired and they have nothing to be excited about at this point.

This!

I'm excited it's coming, but I'm going to wait until members on here have confirmation it's worth the upgrade. Also I would imagine a bigger bulk of us are 21/22's so it hasn't hit our trucks yet.

 

[m_bt54]

Makes sense. I still got another year plus and I’m just excited for the new capabilities.

I use BC enough that, even if the new capabilities weren’t coming, I would have probably still begrudgingly pay up for it when the time came anyway.

 

[m_bt54]

I was about to pull the trigger and brave the cold and put it on last night, just didn't know since its an IPMA if it's going to be another 2+ hour job or not. Had I known it was 1.4 I would have ran out in the my shorts and started it! I'll try to get it on this afternoon and report back.

I stayed up another couple hours after your post, refreshing hoping you or someone else would update and report back!

 

[rugedraw]

A member on the F150forum just installed the new PCSM and IPMA update on his 2023 and is test driving it right now. I will report back what he says here when I hear back from him.

Edit: He drove the truck and feels like BC works better, but there are no additional features in the touchscreen to turn on lane change assist or predictive speed. It looks like there may be an APIM update that will follow up the IPMA/PSCM updates that will be the final piece of the puzzle in terms of activating BC 1.4.

Edit#2: He said it did add "distance indication" and a toggle switch for it in the touchscreen.

 

[fordtruckman2003]

Need an APIM update anyway to fix going to setting screen every time I start the truck. Maybe that bug will get fixed by July. ?

 

[Jesse-Infotainment]

Need an APIM update anyway to fix going to setting screen every time I start the truck. Maybe that bug will get fixed by July. ?

I did a master reset and it fixed it for me. Sucks but I didnt know others were having that issue.

 

[tonesto7]

A member on the F150forum just installed the new PCSM and IPMA update on his 2023 and is test driving it right now. I will report back what he says here when I hear back from him.

Edit: He drove the truck and feels like BC works better, but there are no additional features in the touchscreen to turn on lane change assist or predictive speed. It looks like there may be an APIM update that will follow up the IPMA/PSCM updates that will be the final piece of the puzzle in terms of activating BC 1.4.

Edit#2: He said it did add "distance indication" and a toggle switch for it in the touchscreen.

I can tell you all that I've been running BC1.3 on my truck since Christmas and it's a massive improvement in stability over 1.2 so 1.4 should be so much better.

I will be installing 1.4 on my truck this evening

Sponsored