Search results

Not from Ford. You need to roll back the software in the DSM with FORScan beta. That is the only fix we know of.

VIN is stored in the SOBDMC, SODCMC, IPMA, BCM, HVAC, HCM, RCM, ABS, CCM, SODR & SODL. Good luck!

Same verbiage as PT-25.12.2 that was sent to the 2024+ trucks. I will add it to the 21-23 tab now.

This truck is not connected to Fordpass, so I am limited as to what I can see. The only thing I can think of is to disconnect the negative cable from the 12v battery for 20 minutes (if it is a PowerBoost, then also the aux battery under the rear seat). Many people have reported issues with the...

Are you using FDRS? What is the verbiage mentioned with the B108E DTC you are seeing? 2024+ F150 has a different module architecture than the 21-23. On these trucks, the IPC is controlled by the APIM. If Fordpass is set up on the truck, message me the VIN. I can no longer see the things I...

Agreed. $28 is a much better option than $120 for a 2 day FDRS pass to check these things. If anyone does this, they can also volunteer to check other people's VINs while their PTS access is live.

Yea, we can't run VINs in FDRS anymore without being plugged directly into the vehicle or they ban the accounts. My PTS account has also been limited in terms of what I can see and I can no longer see pending upates. I can still see some things that are helpful, but pending updates is not one of...

I saw your other posts about this with @Ajzride but I am not sure if anyone has tried it. TRON does not check for the VIN to match, but not sure if the different firmware and/or part number will cause an issue with FDRS and TRON authorization. If you end up trying it, let us know if it works or...

Added this one to the 2024+ tab of the spreadsheet.

Assuming you have the 7-speaker system, here you go.

Ok, lmk when you do and I will check again.

I got your message, but it seems like you have certain data sharing options turned off. I am unable to see the codes even though it seems like connectivity is working fine. The problem is, those things are turned on and off in the touchscreen, so if you can't see it, you won't be able to turn...

I message you in a bit.

Have you checked it for codes? If your Fordpass is connected, message me the VIN and I can check the codes it is reporting.

Very unlikley FDRS will update it since the p/n will not match what the server has for your truck. I have the IPC files if you want to side-load them with FORScan. Just note it will take 5-6 hours to flash it so you will need a good battery power supply.

Then I'm guessing the VDM will have to nbe calibrated. I am not sure if FORScan has a service procedure for that. In the wrench icon when you click the VDM, is there a calibration procedure for it?

Try clicking the VDM in ab format mode, scroll to the bottom and hit write all.

The option to view that camera at speed is disabled in your IPMA. Replacing the camera will not fix that. If all you care about is the bed camera at speed, make this change with FORScan: xxx2 xxxx xx-- If you want all cameras that can work at speed to work at speed, change it to an F...

I don't see any codes relating to a bad camera. I see a PCM update was sent to you a bunch of times and failed until it finally installed yesterday. Unfortunately, I can no longer see pending updates or what the dealer did or didn't do.

I wouldn't think twice about it and just do this.