ECU module programming guide using FDRS

[JEB]

Well, I completely bricked my 2021 Job 1 Lariat last year with a faulty BCM update (100% Ford's fault). Thankfully Jesse was able to work through a restoration process with me and we got it back to life after a couple hours of stressful effort using Forscan.

I know. You’ve said so. A lot. If complaining were an Olympic sport, you’d be a medalist.

I applied the same update without issues.

Sponsored

 

[RickBullotta]

I know. You’ve said so. A lot. If complaining were an Olympic sport, you’d be a medalist.

I applied the same update without issues.

Well, after the latest fun with BCM updates, my concerns seem fairly realistic...

 

[Snakebitten]

Sounds like it was a pretty painful experience though. I remember the story in real time.
I know I would be wary of such a thing. In fact, I AM!

 

[Eric55AMG]

Ha!

They won't give me an APM update ... or an IPC update ... or an IPMA update to fix what they broke with the last SCCM update (probably still working on this) ... but they'll give me a "suspect" BCM update in FDRS.

I think I'll sit tight on this one for a bit to see if it gets pulled back or not.

 

[Jesse-Infotainment]

Some new videos of the IPC update and how it will work once Ford gets around to sending the IPMA update out. Not sure what the hold up is. Could be they have to run a reconfig on the APIM and IPMA and have to make sure they get all that right. But anyways here are a couple short ones showing some new features.

The lower video is while BC engaged and a lane is available to maintain set speed. It suggests a lane change

This is the turn speed assist Icon

 

[fordtruckman2003]

While I don't have BC that looks cool.

I hope the non-BC among us get the benefits of better lane keeping with our adaptive cruise.

 

[Txmade]

Is FDRS down? It keeps saying login server failure.

 

[Paul Neubauer]

Some new videos of the IPC update and how it will work once Ford gets around to sending the IPMA update out. Not sure what the hold up is. Could be they have to run a reconfig on the APIM and IPMA and have to make sure they get all that right. But anyways here are a couple short ones showing some new features.

The lower video is while BC engaged and a lane is available to maintain set speed. It suggests a lane change

This is the turn speed assist Icon

They should have released the updated BC to keep our interest before begging for subscription money on a product that needed improvement. I never use BC because I don't like how it crowds one side of the lane and can never pick a steady spot in the lane.

 

[Ajzride]

13x more engagement than Bluecruise 1.0. that means it only kicks out every 15 minutes now.

 

[mdomicolo]

Is FDRS down? It keeps saying login server failure.

I’m thinking so! I can’t get in either.

 

[antho]

@Ajzride did you get that 7.0 update?

 

[HammaMan]

Ford sent me an email

Bluecruise 1.4 OTA'n to MMEs

 

[Ajzride]

@Ajzride did you get that 7.0 update?

Mach E email. I've not seen anyone get the email regarding an ICE F150.

Since I have a Comma3X on my F150 and stock on my Mach E, I'll easily be able to compare them.

 

[Txmade]

I was able to get in, I had updated to the latest version and that is when all the issues started I googled and found the last update before the new one, and installed that and started working again.

I’m thinking so! I can’t get in either.

 

[mdomicolo]

I was able to get in, I had updated to the latest version and that is when all the issues started I googled and found the last update before the new one, and installed that and started working again.

Crap. I wonder what my issue is. ?

Sponsored