ECU module programming guide using FDRS

[Jesse-Infotainment]

Currently on Version: 23159 Rev 915

Only software update available in FDRS is BCM that can’t be done because of the NATSF login.

Is there anything I can do to get updated further while I have FDRS access this weekend?

Send me your vin

Sponsored

 

[Mstephens20]

Send me your vin

1FTFW1ED9MFB06427

 

[Jesse-Infotainment]

1FTFW1ED9MFB06427

Ill send you an update when FDRS is back up from Sunday maintenance

 

[Mstephens20]

Ill send you an update when FDRS is back up from Sunday maintenance

I appreciate it!!!
Says it expires 5/26, do I have until midnight to use?

 

[Jesse-Infotainment]

I appreciate it!!!
Says it expires 5/26, do I have until midnight to use?

Yes

 

[rugedraw]

Ill send you an update when FDRS is back up from Sunday maintenance

I need to stay off the forums when I'm drinking. Can't believe I missed that. ?

 

[Jesse-Infotainment]

Show me the contents of the usb. Because you must not have used the old update and not the one I sent

 

[JEB]

New Driver Front Seat Module (DSM) update dropped overnight. Install was uneventful. If you use easy exit, the update will turn it off and you will need to turn it back on again.

 

[Mstephens20]

Yesterday was a long one, but I think I’m caught up.

Got down to the BCM, but @Jesse-Infotainment and @rugedraw helped me with a GWM module that was pending. Once that went in, these popped up in order:

DSM (drivers front seat module — the test is fun on that one, like a ride)
APIM (23159 rev 915)
GWM
TCU
GWM

Then a chat with @rugedraw and @Jesse-Infotainment got me:

GWM (provided)
APIM (23167 rev 926)
GWM
APIM (23291 rev 1049)
TCU
IPC (one display momentarily said, “Enable lane change asssist?” — so they are getting stuffed queued for later).

Now it’s just the BCM left, which apparently has bricked some trucks, so I understand the roadblock. I’ll do one more scan before the license runs out today. Right now all the self tests are green and everything seems to be up to date.

GWM (provided)
APIM (23167 rev 926) - Current
GWM - Good
APIM (23291 rev 1049) - Keeps giving me Unable to obtain software binary file:
Currently keep selecting retry hoping it’s moving forward. Did you run into this problem?

 

[fordtruckman2003]

GWM (provided)
APIM (23167 rev 926) - Current
GWM - Good
APIM (23291 rev 1049) - Keeps giving me Unable to obtain software binary file:
Currently keep selecting retry hoping it’s moving forward. Did you run into this problem?

Be sure you have free space on hard drive since that came up recently with another doing updates. Plus it is Sunday which can cause issues with server side of things so retrying later today is a good plan.

 

[rugedraw]

GWM (provided)
APIM (23167 rev 926) - Current
GWM - Good
APIM (23291 rev 1049) - Keeps giving me Unable to obtain software binary file:
Currently keep selecting retry hoping it’s moving forward. Did you run into this problem?

Try closing out fdrs or restart the laptop altogether.

 

[BadTime]

Try closing out fdrs or restart the laptop altogether.

Same thing, will try rugedraw's suggestion.

 

[BadTime]

I can attest doing what rugedraw said (once again) worked for me. That 3 hour APIM update was a soul crusher though.

 

[Mstephens20]

Try closing out fdrs or restart the laptop altogether.

Jesse helped me get it done.

 

[Mstephens20]

I can attest doing what rugedraw said (once again) worked for me. That 3 hour APIM update was a soul crusher though.

Lol…Yeah was a decent 5.9gb file

Sponsored