ECU module programming guide using FDRS

[speedracercjr]

suuuuup. been out a few days. looks like 5+ pages back i need to read. anything significant happen the last week? i successfully moved 3 states east. turned off auto-updates as a precaution. didn't need a fiasco during a move.

might have to see if any of you texas guys wanna meet up for a beer sometime. without taking the thread off topic, if anyone has a good Irish red, please send me a pm.

Welcome to Texas, did you get your free gun yet?

Sponsored

 

["Steve"]

not yet!! yeehaw!

 

[RellIk&5]

I just went into FDRS and see there is a new IPC update.
2021 F150 XLT 302a with 8” cluster 5.0L

Do you have 360 cameras? If not and you got this update, I know what I'll be doing this weekend!

 

[TJSparky]

Do you have 360 cameras? If not and you got this update, I know what I'll be doing this weekend!

No I don’t have the 360 camera package either.

 

[TJSparky]

You have an XLT with an 8” instrument cluster. An IPC update for the 8” cluster wouldn’t apply to the larger instrument clusters on higher trimlines, even if you had the same sized 12” Sync screen. Sync is updated via APIM updates.

I checked FDRS and no IPC update for my Lariat as of late last night.

yup, I was just mentioning that my truck has the tech package with the 12” sync screen in case some people were confused (clarify) between the two. Sync vs Cluster.

 

[TJSparky]

You will be at

188 NU5T-10F906-GAB
124 NU5T-10F902-GAB

after the update.

After update… Jesse was dead accurate!

 

[speedracercjr]

Notice any changes?

 

[TJSparky]

Nothing I can see right away. Maybe Jesse has some insights on what this update is supposed to include.

 

[tonesto7]

After update… Jesse was dead accurate!

Lol... I've learned to stop questioning him... He does so many of these it's all from memory

 

[Jesse-Infotainment]

Nothing I can see right away. Maybe Jesse has some insights on what this update is supposed to include.

Looks like this update is in reference to TSB 22-2186

IPC forgets My View Settings.

 

[TJSparky]

Lol... I've learned to stop questioning him... He does so many of these it's all from memory

No way I would question him either. He is the “Chosen One!” Lol… just wanted to point out he knew right away what it would be!

 

["Steve"]

anyone mind checking if i have anything in fdrs?

1FTFW1ED8MFB55506

 

[tonesto7]

anyone mind checking if i have anything in fdrs?

1FTFW1ED8MFB55506

You have 3 updates ACM, GSM, and IPC

 

[egap69]

So I got my truck back from the dealer after they did the software updates needed for BC. While they had the truck they replaced the IPMA. They tried to PMI the new IPMA and it failed so they left it. There was a DTC that cleared after driving so they handed it back over to me. Long story short BC still doesn't work. I called Ford tech support and they told me the truck has all the needed software and BC should work. What do I do now? I made changes to the IPMA in forscan and when I try and load them back into the new IPMA module I get a configuration mismatch. Anyone run into this issue?

 

[jcaspar]

Looks like this update is in reference to TSB 22-2186

IPC forgets My View Settings.

Oh! That is a welcome update!

Sponsored