ECU module programming guide using FDRS

[Snakebitten]

Glad to hear!

I wish Ford would put a more descriptive reason on why the truck continually asks to restart the truck.

Why?
We have YOU!
Lifesaver

Sponsored

 

[Jmendoza]

Wondering if someone can verify there sound balance and fade that has done updates. My axis Seem off not centered.(reset sets it that position) ...not sure what it was before update . Thanks

 

[Fordphanatic]

Wondering if someone can verify there sound balance and fade that has done updates. My axis Seem off not centered.(reset sets it that position) ...not sure what it was before update . Thanks

Yes it happened after last apim update and unreal engine interface.

 

[Jmendoza]

Yes it happened after last apim update and unreal engine interface.

Hmm . Ok. Guess as long as it wasn't just me ... Any fix ? Guess got to mess with it and center and see if it's really off or what

 

[Snakebitten]

It's just the graphic image of the interior not scaling properly with the default target.
If you hit reset, it will not look right on the image, but the audio will be correctly balanced to default.

 

[Jmendoza]

It's just the graphic image of the interior not scaling properly with the default target.
If you hit reset, it will not look right on the image, but the audio will be correctly balanced to default.

Awesome ..just what wanted hear ?

 

[Mtntrls]

SCCM didnt update becasue its not the correct seril for your truck.. It will only update modules tht the serial matches what the truck shows. Only way to attempt to correct is attempting a PMI of the SCCM in the truck

Thanks, as always, Jesse - it didn’t seem like the PMI worked, said part number not found. Oh well, everything works so I won’t worry about it.

Also, a couple days after finishing updates (including BCM) I got DTC B14D8 Bed Lamp Output -Circuit Short to Battery or Open.

Bed lamps don’t work but bed switch turns on cargo lamp and puddle lamps, etc. I’ve also been driving in the rain lately. You think coincidence and it’s actually shorted or know of anything like this related to BCM update?

PS you were absolutely right the PCM and ABS updates make the adaptive cruise and overall drive much nicer!

 

[Jesse-Infotainment]

Thanks, as always, Jesse - it didn’t seem like the PMI worked, said part number not found. Oh well, everything works so I won’t worry about it.

Also, a couple days after finishing updates (including BCM) I got DTC B14D8 Bed Lamp Output -Circuit Short to Battery or Open.

Bed lamps don’t work but bed switch turns on cargo lamp and puddle lamps, etc. I’ve also been driving in the rain lately. You think coincidence and it’s actually shorted or know of anything like this related to BCM update?

PS you were absolutely right the PCM and ABS updates make the adaptive cruise and overall drive much nicer!

The config of the BCM didnt go through.

726-50-02

XXXX

XXXX

044F

 

[dolsen]

PS you were absolutely right the PCM and ABS updates make the adaptive cruise and overall drive much nicer!

I did notice that my truck doesn't brake going down hill to keep the exact speed like it did before those updates, but I hate that it increased my highway following distance by almost double. That is probably more due to the IPMA update if I had to guess.

Does anyone else feel that the adaptive cruise brakes WAYYY too hard sometimes?

 

[Mtntrls]

The config of the BCM didnt go through.

726-50-02

XXXX

XXXX

044F

Ah shoot should I just reload my forscan backup?

 

[Jesse-Infotainment]

Ah shoot should I just reload my forscan backup?

NO Confoig changed after Update

 

[Mtntrls]

Got it. Thank you for that heads up.
*Edited for my stupidity.

 

[Jesse-Infotainment]

Got it. Thank you for that heads up. Do you recommend change just 726-50-02 (to xxxx-xxxx-04– or to xxxx-xxxx-00– ? Looking at spreadsheet) or use FDRS to reload config?

Do whatever I give up.

 

[Mtntrls]

Do whatever I give up.

Sorry Jesse! Just getting over COVID and my brain is scrambled.

 

[TJSparky]

Looks like a new APIM Update just dropped. I’m downloading it now. Came up after I ran a scan in the truck.

it’s about 3GB

Sponsored