ECU module programming guide using FDRS

[Mike G]

Can someone list the updates available for my truck please?

Much appreciated: 1FTFW1ED6MFB47646

Sponsored

 

[Jesse-Infotainment]

I don't know the technical reasons on 22 and up models, but I know of a 21 Raptor that BC works 100% on no problems. Granted there was some tinkering done with the software to make it work, but AFAIK no hardware was installed for it to work.

 

[topgun964]

Well after about 4.5 hours of updating I am finally on 22228. It took several GWM and APIM updates to get there. Everything seemed to be working last night but I had a problem with carplay connecting on my way to work today. I was never able to get it to wirelessly connect. I was able to use the USB but that is not ideal. I tried deleting the phone from the phone list but that did nothing and would not remove the phone. Can you think of anything to try?

 

[Jesse-Infotainment]

Well after about 4.5 hours of updating I am finally on 22228. It took several GWM and APIM updates to get there. Everything seemed to be working last night but I had a problem with carplay connecting on my way to work today. I was never able to get it to wirelessly connect. I was able to use the USB but that is not ideal. I tried deleting the phone from the phone list but that did nothing and would not remove the phone. Can you think of anything to try?

Try network reset on your phone.

It will forget all WIFI networks stored but it has worked for me when I had that issue.

 

[m_bt54]

Try network reset on your phone.

It will forget all WIFI networks stored but it has worked for me when I had that issue.

also make sure you are deleting both the phone from the car and the car from your phone. You may have done this already but only mentioned deleting the phone from the car

 

[topgun964]

also make sure you are deleting both the phone from the car and the car from your phone. You may have done this already but only mentioned deleting the phone from the car

When I try to delete it from the truck, it does nothing. I can remove it from my phone with no problem.

 

[m_bt54]

When I try to delete it from the truck, it does nothing. I can remove it from my phone with no problem.

If you can’t delete it from your truck I would power off your phone completely and disconnect it from usb( if it’s connected). Turn off your truck then turn it back on and try again

 

[superfordman]

I don't know the technical reasons on 22 and up models, but I know of a 21 Raptor that BC works 100% on no problems. Granted there was some tinkering done with the software to make it work, but AFAIK no hardware was installed for it to work.

Good to know, ya I figured if everything was there hardware, why couldn't you fiddle with it to make everything work like it should. I imagine they just disabled it software wise on the 22s unless they removed something hardware wise as well, but I almost doubt that.

 

[Big Dog Daddy]

So I made 1 change in forscan on my truck on 11/04/22 to enable unreal mode in sync. I have since pulled my as built from the Motorcraft site every day at 8:00 am when I get to work. As of today the change has not propagated up to the Motorcraft site. When it does ill let you all know.

UPDATE;
I checked my Motorcraft as built data this morning, as I have done every morning for the last month, and this morning I see that the change I made in Forscan on 11/04 has now propagated up to Ford's servers. I don't know when it uploaded but it had to be sometime between 8:30 am on 12/01/22 and 8:30 am on 12/02/22 . 27 days

 

[Jesse-Infotainment]

UPDATE;
I checked my Motorcraft as built data this morning, as I have done every morning for the last month, and this morning I see that the change I made in Forscan on 11/04 has now propagated up to Ford's servers. I don't know when it uploaded but it had to be sometime between 8:30 am on 12/01/22 and 8:30 am on 12/02/22 . 27 days

Vehicle scans are now working more reliably. So if you did a vehicle scan in FDRS they are now workign almost immedietly.

So this is good news

 

[Mtntrls]

UPDATE;
I checked my Motorcraft as built data this morning, as I have done every morning for the last month, and this morning I see that the change I made in Forscan on 11/04 has now propagated up to Ford's servers. I don't know when it uploaded but it had to be sometime between 8:30 am on 12/01/22 and 8:30 am on 12/02/22 . 27 days

Mine just updated, too - that took awhile.

I changed the SCCM for the heated steering wheel - any ideas on why all modules would have updated on the server except the SCCM?

Was planning to do some FDRS updates this weekend, would this have any ill effects assuming I back up my Forscan values and do a network scan (Mongoose Plus)?

 

[Jesse-Infotainment]

Mine just updated, too - that took awhile.

I changed the SCCM for the heated steering wheel - any ideas on why all modules would have updated on the server except the SCCM?

Was planning to do some FDRS updates this weekend, would this have any ill effects assuming I back up my Forscan values and do a network scan (Mongoose Plus)?

SCCM didnt update becasue its not the correct seril for your truck.. It will only update modules tht the serial matches what the truck shows. Only way to attempt to correct is attempting a PMI of the SCCM in the truck

 

[cparuch]

Hello,
I am currently on power-up 2.7.4 and no OTA updates are available. I took the truck to a dealership and they stated that there are no updates available. I decided to purchase the nano and the FDRS license, i followed all of the instructions and I do not see an update available. My VIN is 1FTEW1EP2MFA81165. This is all I see for my updates:

I did notice that the in the vehicle info tab, the Software P/N for the APIM is missing some information.

Any suggestion first, on how to get get the truck to update to 3.5.4 and second, how to address the APIM info?

Thanks

 

[Jmendoza]

Hello,
I am currently on power-up 2.7.4 and no OTA updates are available. I took the truck to a dealership and they stated that there are no updates available. I decided to purchase the nano and the FDRS license, i followed all of the instructions and I do not see an update available. My VIN is 1FTEW1EP2MFA81165. This is all I see for my updates:

I did notice that the in the vehicle info tab, the Software P/N for the APIM is missing some information.

Any suggestion first, on how to get get the truck to update to 3.5.4 and second, how to address the APIM info?

Thanks

All those modules in blue screenshot are updates for you ...and need to be performed to reach latest version avail to you

 

[Snakebitten]

All those modules in blue screenshot are updates for you ...and need to be performed to reach latest version avail to you

I was a little confused myself when he showed his update list but stated "I do not see an update"?

Perhaps he meant an APIM update specifically?

Sponsored