ECU module programming guide using FDRS

[Mike G]

There may be some issues...

I am now connected but this failure to connect to the FDSP servers happened a few times today before it took. This is with 32.5.4. This started happening when that version was installed. Never happened before.

Mike

Sponsored

 

[tonesto7]

I lift them off the windshield

It only does that for me when the rain sensing is selected on the wiper stalk before starting an IPC update.

 

[Jesse-Infotainment]

It only does that for me when the rain sensing is selected on the wiper stalk before starting an IPC update.

Yeah I always forget to turn it off

 

[Itsjustmd]

i can only check FDRS for updates pending not the OTA stuff in PTS. you don't have anything listed besides GSM (which should clear now).

Do you mind checking for me? Thanks!
1FTFW1ED8MFB62018

 

[Mike G]

Do you mind checking for me? Thanks!
1FTFW1ED8MFB62018

TCU and GSM.

Mike

 

[KevinP]

My truck was at the dealer for 2 weeks and they assured me bluecruise was installed. Of course my truck is still stuck on 1.7 with the grayed out update button. I decided to take matters into my own hands and bought the mongoose, required adapters, and frds license. I am able to get most of the way through the module repair utility and keep getting stuck on the part where I plug in the Ethernet cable/adapters. I tried 3 different adapters including the star tech that’s listed in the TSB. Has anyone successfully run the module repair using a Microsoft surface? Any help is appreciated. And if anyone in the Houston area can help get me unstuck I’d gladly compensate for your time. Here is a screenshot of where I’m getting stuck:

After driving around with the USB drive installed for about 2 months the APIM update finally kicked off and I am now past the "stuck module" issue. I decided to renew my FDRS license this morning and started successfully updating modules including GWM, APIM, TCU, IPC, etc. I am at the point now where I am at SYNC version 22087 Revision 415 which appears to be about half way to Blue Cruise, but FDRS is not showing any more available updates. (It is showing a GWM update which I already completed). Any ideas?

 

[Kanuck]

A little off subject... well sort of...what is the TCU do? (Telematic Control Unit Module)

 

["Steve"]

^^do gwm again. or you might have to wait overnight for that one to settle.

 

[Snakebitten]

After driving around with the USB drive installed for about 2 months the APIM update finally kicked off and I am now past the "stuck module" issue. I decided to renew my FDRS license this morning and started successfully updating modules including GWM, APIM, TCU, IPC, etc. I am at the point now where I am at SYNC version 22087 Revision 415 which appears to be about half way to Blue Cruise, but FDRS is not showing any more available updates. (It is showing a GWM update which I already completed). Any ideas?

All you can do is let the truck and the cloud sync up. It can be nudged a bit with a fresh Network scan in FDRS. And probably a good idea to address any DTC's that you come across. But ordinarily there wouldn't be a big delay in the cloud making the next available updates being queued up for you in FDRS.

 

[Jesse-Infotainment]

Apim 22095 Update is showing on my end for you @KevinP

 

[Snakebitten]

A little off subject... well sort of...what is the TCU do? (Telematic Control Unit Module)

 

[Kanuck]

Thank you... they could just call it a Smart Network Switch tho... but, engineers need to make it sounds complicated...

 

[KevinP]

Apim 22095 Update is showing on my end for you @KevinP

Jesse,

I have run that update 4 times now with no errors and it keeps showing up on the list. It is an APIM and TCU multi module update.

 

[Jesse-Infotainment]

Jessie,

I have run that update 4 times now with no errors and it keeps showing up on the list. It is an APIM and TCU multi module update.

Ok, I had that Issue. Youll have to wait. I can send you the files for JV. Its what I see right now. Or you can just wait until tomorrow.

 

[ENG430]

Any idea if 2021 job 2 has an APIM update? Thanks

Sponsored