ECU module programming guide using FDRS

[Fordphanatic]

I had it into the dealer yesterday for some issues. They were doing some updates where one large one failed, tried it again and it went through (99,000+ steps). There are some more updates to be completed and they kept the truck to finish up Monday. Can someone have a look when they have a little time. Very curious as to what is happening/done to my truck.
Thanks
My VIN is 1FTFX1E81MKE01710

This is the updates they did

Sponsored

 

[Autofill]

how f_cked am i?

Hit the NOS button anyway.

 

[Jesse-Infotainment]

that's perfect, thanks. 470 dry swipes over 3 hours in the sun could kill those blades.

I lift them off the windshield

 

[Kanuck]

This is the updates they did

Thanks Mike

 

["Steve"]

I lift them off the windshield

good to know it's normalish. might be a nice * to add to the guide.

 

[wayfarer556]

@wayfarer556 It's probably the PCM update and change in weather helping out the most with the fuel economy.

Only thing is the change in the weather was making my truck less efficient when I had AC on full blast for the 105 heat.
Post update improved on that too.
God I wish we could see the patch notes

 

[wayfarer556]

I had it into the dealer yesterday for some issues. They were doing some updates where one large one failed, tried it again and it went through (99,000+ steps). There are some more updates to be completed and they kept the truck to finish up Monday. Can someone have a look when they have a little time. Very curious as to what is happening/done to my truck.
Thanks
My VIN is 1FTFX1E81MKE01710

Probably the IPC update, that’s a big one with that many steps

 

["Steve"]

i am at 2.7.1. i think. just did IPC and now it's doing GWM. any takers on what's likely to follow and what version i may get up to when said and done? job 1 21 302a pb.

 

["Steve"]

i'm sorry, times up. APIM was the answer we were looking for...

 

[RellIk&5]

I just did the PCM and GSM updates on my truck. The GSM definitely is a new version and it cleared after I did the update. So just an FYI, if you have a GSM, it's a real update.

I have an IPC update but didn't do it yet. Can anyone who's done the IPC confirm if they notice anything new? How long did this one take? Last time I did an IPC update it took about 6 hours. @Steve looking at you since you just did the IPC!

Thanks!

 

["Steve"]

i just did ipc this am. it was at least 4 hours.

 

[RellIk&5]

i just did ipc this am. it was at least 4 hours.

I'll probaby do it tomorrow afternoon if it's a 4 to 5 hour update. Really want to know if there's anything noticeable in it before pulling the trigger on the update. Last time I did my IPC it didn't go so smoothly either.

 

["Steve"]

2.8.3 boys...

 

["Steve"]

GSM gone...

 

[TJSparky]

For ‘21 XLT 302a trucks with 5.0l 8” cluster, there is a new GWM update which then leads to a new APIM. Loading new APIM now.
GWM 248MB
APIM 864MB

Sponsored