ECU module programming guide using FDRS

[BHunted1]

No.. just take your time and follow the advice on here. For the updates you have stay away from the nano.

Hi Jesse, see anything updates on that TRM mod yet? Waiting till it is released to resubscribe to FDRS.

Sponsored

 

[Jesse-Infotainment]

Hi Jesse, see anything updates on that TRM mod yet? Waiting till it is released to resubscribe to FDRS.

Its going to be a LONG time before you see it.

 

[phileefan]

@Jesse-Infotainment

A couple of days ago you ran my VIN# and came back with these available updates. I have a 2021 job 2 truck, is there any issues you can see with me doing these updates? I'm not planning on doing them right away, just trying to get up to speed with the whole FDRS process. Thanks......

@Jesse-Infotainment

Thanks. Are you aware if any of the updates will improve my gas mileage? I don't get anything near the 24/24 mpg rating on the sticker?

 

[Jesse-Infotainment]

I dont have any input on that. I have heard from PB owners that the updates have made improvments in performance outside power... meaning shifting a driving experience. That was referencing Job one trucks though. Im not sure what impact the Job 2 will have, we have not had any Job 2 reports after updates. So maybe you can be our first and let us know. I am always wanting to hear and learn so I look forward to how things go for you and the results..

 

[phileefan]

I dont have any input on that. I have heard from PB owners that the updates have made improvments in performance outside power... meaning shifting a driving experience. That was referencing Job one trucks though. Im not sure what impact the Job 2 will have, we have not had any Job 2 reports after updates. So maybe you can be our first and let us know. I am always wanting to hear and learn so I look forward to how things go for you and the results..

Yes I will definitely report back any findings. Thanks..........

 

[mflynndelta]

This will be there until the update is complete.

Send me your vin Ill look and see whats stalled.

1FTFW1ED3mfb23739

 

[Jesse-Infotainment]

1FTFW1ED3mfb23739

Your Cluster Update failed. The large half didnt install .. 188 did but not 120. Until that is done it wont allow anything else. You are CLOSE too. So we need to work to get that 120 installed. If the dealer is doing the updates they need to try a PMI of the ICP

 

[mflynndelta]

Your Cluster Update failed. The large half didnt install .. 188 did but not 120. Until that is done it wont allow anything else. You are CLOSE too. So we need to work to get that 120 installed. If the dealer is doing the updates they need to try a PMI of the ICP

what do you mean I am close ? Apparently Ford is putting a patch into the update now.

 

[Jesse-Infotainment]

what do you mean I am close ? Apparently Ford is putting a patch into the update now.

Close to having BC. Ok You listen to ford then

 

[jordandev]

So I've been stuck on 21281 revision 244 with my 302A for 2-3 weeks. Checking FDRS every other day and nothing new was showing up.

For some reason, an IPMA + PSCM update showed up today (ABS was a few days ago, just didn't do yet):

Is this IPMA update safe with a nano (I don't have a CCM to brick, no adaptive cruise here). No reports of anything being bricked outside of the CCM yet so seems so... (was eventually going to get a Mongoose still but its been out of stock and the price in Canada is fun)

 

[turbopilot]

I have run out of time on my $50 ticket to use FDRS with the same Ford server error trying to update the Gateway Module (GWM) in my F-150. It appears the Ford server is not properly provisioned to allow the update.

I summited a trouble ticket to [email protected] as instructed by Ford.

Will update if they respond. Ford seems to be going out of their way to make it just as hard as possible to get BlueCruise. Must be driving the dealers up the wall. What a mess.

I also set the OTA updates to once a day but no activity there.

 

["Steve"]

so are only the lariat+/BC guys getting past 2.3.0? or are any 302a guys on 2.5.1+? seen a few posts about 302a guys plateauing at 2.3.0 and nothing further coming in OTA.

 

[speedracercjr]

so are only the lariat+/BC guys getting past 2.3.0? or are any 302a guys on 2.5.1+? seen a few posts about 302a guys plateauing at 2.3.0 and nothing further coming in OTA.

I believe that is the case. I don't think there is anyone without BC hardware that is getting past 2.3

 

["Steve"]

thanks for confirming, cory. making sure that was accurate and up to date info. so i can reduce my expectations.

 

[turbopilot]

As I reported I have crawled slowly up to 22028_PRODUCT Revision: 358 which I think is PowerUp 2.4.5 but for some reason that version number does not show up anywhere. I am now stopped at the next BC threshold pending the GWM module server error.

There are hints BC is coming alive now as I drive. Iconology is changing. Now when I turn on adaptive cruise it says BlueCruise is on but it still wants my hands on the wheel.

Sponsored