ECU module programming guide using FDRS

[rugedraw]

Do these updates fully enable 1.4?

No, they do not.

Sponsored

 

[Txmade]

What is still missing ?

No, they do not.

 

[rugedraw]

What is still missing ?

The features for BC 1.4 are hidden in the update, but they are not turned on. An update would also be needed for the APIM to add the toggle buttons for lane change assist and predictive speed.

 

[Txmade]

Wasn’t it there some posts about enabling it via forscan or will that not work?

The features for BC 1.4 are hidden in the update, but they are not turned on. An update would also be needed for the APIM to add the toggle buttons for lane change assist and predictive speed.

 

[rugedraw]

Wasn’t it there some posts about enabling it via forscan or will that not work?

Yes, but the FORScan changes needed to do it are not publicly posted like the other FORScan mods are. The people who came up with the changes decided not to make them available to everyone for reasons not disclosed to the general public.

 

[astrand1]

Can confirm that the new IPMA update now allows turn signal camera view when a trailer is connected. This is on my 22PB.

 

[JasonATL]

21 updates dropped this morning !

Installed on my Job 1 ‘21 without issue.

 

[rugedraw]

Can confirm that the new IPMA update now allows turn signal camera view when a trailer is connected. This is on my 22PB.

LOVE that feature. It's my fav.

 

[tbinmd]

Can confirm that the new IPMA update now allows turn signal camera view when a trailer is connected. This is on my 22PB.

Did you need to make forscan changes to enable?

 

[astrand1]

Did you need to make forscan changes to enable?

Yes. Only 2. One in IPMA and one in the apim to show the toggle for it under driver assistance.

 

[astrand1]

Did you need to make forscan changes to enable?

Here are the 2 changes I had to make.
Nevermind the error msg it’s talking about. I just pulled this from another thread.

 

[Droidrage2020]

@Jesse-Infotainment can confirm, but this has happened to a few people and he recommended doing a PMI on the BCM to fix the issue.

It seems all is now well.. thanks a ton to those who offered wisdom especially @Jesse-Infotainment for the help!

 

[rugedraw]

Did you need to make forscan changes to enable?

Please note that this will only work on 2023 F150's or if you have applied the latest IPMA upate to your truck.

 

[tbinmd]

One of the BC1.4 features is the lane change, does that work with changes?

 

[rugedraw]

One of the BC1.4 features is the lane change, does that work with changes?

Yes, and that feature actually works very well.

Sponsored