2021+ F-150 FORScan List / Database / Spreadsheet

[Codycat91]

I know I saw somewhere that there's a way to display the digital number of oil and trans temp under the temp gauges on an XLT cluster, but I cannot seem to find that info anywhere

Sponsored

 

[Beaux]

I know I saw somewhere that there's a way to display the digital number of oil and trans temp under the temp gauges on an XLT cluster, but I cannot seem to find that info anywhere

That’s an option in the settings without having to use forscan.

 

[Kanuck]

21 to 23 Xlt and lower trims with the 8 inch display IPC will not display temps. You need the 12 inch IPC display, Lariat and up.

 

[1slo5oh]

Is it possible to disable the cylinder deactivation on the 24s with Forscan? Its annoying as hell on the highway, especially with a catback, sounds like a mac truck lol

 

[CrzyBltzn]

I am having trouble getting forscan to write and save the trailer side view IPMA code for my 21 F150. It writes it correctly then I hit stop. Navigate to another module or disconnect. Nothing happens. I go check that block and it is changed back to the as built data.
I have successfully made many changes based on the spreadsheet. Thank you for sharing.
Is the 12/23 IPMA update you referenced an OTA update or is it dealer only?

 

[rugedraw]

I am having trouble getting forscan to write and save the trailer side view IPMA code for my 21 F150. It writes it correctly then I hit stop. Navigate to another module or disconnect. Nothing happens. I go check that block and it is changed back to the as built data.
I have successfully made many changes based on the spreadsheet. Thank you for sharing.
Is the 12/23 IPMA update you referenced an OTA update or is it dealer only?

FDRS only unless you side-load it with FORScan which goes beyond the scope of knowledge of most of us in terms of how to do it and having the files to do it.

 

[jafo]

I'm not sure what version of BlueCruise I have. I've gone through all the updates(except BCM) and says it they are all installed. I was hoping to get beyond BC v1.0 features.

My VIN: 1FTFW1ED0MFB90847

Are there any updates I've missed?

 

[wyoming]

This is working great on my 24 Lariat 502a though I have noticed that if you turn off either the Audible feedback or Walk Away Lock via the Sync screen it will throw an error saying "This setting isn't available right now. Please try again later" if I try to turn back on.

I then will have to go back into forscan and change 726-89-01 xxx1-xxxx-xxxx
from 0 back to 1 or 726-89-02 xxx1-xxxx-xxxx from 0 back to 1 depending on which one I turn off.

Any ideas? Sorry if this has been mentioned already I went through and didn't see mention of it.

I have the same issue. Did you figure anything out on this one? Did yours work before you tried to change the setting in sync?

 

[Ricksc]

Is there a way to make DRL’s blink when turn signal is on? Not sure if I missed it in all of this.

 

[fordtruckman2003]

Is there a way to make DRL’s blink when turn signal is on? Not sure if I missed it in all of this.

Backup your asbuilt data first like you always should do.

Then use the easy mode on BCM I believe it is. There are settings for each light. It is probably in there easier to find than the Excel file. I'm not sure the legal issues with a blinking white light. If you have the Raptor lights with orange DRL it makes perfect sense.

 

[Ricksc]

Thanks I will look into that. White or amber are legal in the front. Now not sure after I bumped them up to 70%.

 

[fordtruckman2003]

This reminded me yesterday I saw an F-150 and I think the rear DRL were blinking with turn signals. Maybe I was seeing things but I'll have to look into that one for my own curiosity.

 

[Hyins]

Thanks I will look into that. White or amber are legal in the front. Now not sure after I bumped them up to 70%.

not confirmed, you can try yourself
726-38-02 xxx0-xxxx-xx** (DRL_WithTurn_Cfg, 0=Allow)
726-42-01 x6x6-xxxx-xx** (LF&RF_DRL_Lamp_Ckt_Usage_Cfg, 6=STOP_TURN)

 

[Big Dog Daddy]

Go to the motorcraft as built data site and download your as built data for your VIN then check and compare what you changed verus what forscan is showing.

https://www.motorcraftservice.com/AsBuilt

 

[Louisville80]

2023 STX FX4 2.7 SCAB
I cannot get the seatbelt chime to turn off. I tried the nonforscan method multiple times. Acc on, Parking brake on, wait 5 seconds, buckle/unbuckle 4 times. I've tried stopping here and also buckling/unbuckling one more time while the seatbelt light is blinking. No dice.

I tried the forscan quick settings for driver and passenger belt minder disable. I tried changing the asbuilt figures to match the posts covering this in this thread. I've tried an ipc reboot after making the changes. Still the chime goes off.

The weird thing is in the ipc asbuilt the line 720-01-01 xxxx xx0x xx-- is supposed to be driver belt chime off. That was always 0 from the factory. Even looking at my asbuilt from motorcraft service it shows that one number in 720-01-01 as zero.

Vin 1ftex1ep2pfb15011

Any help would be appreciated. I just can't figure this out.

Thanks in advance.

Sponsored