2021+ F-150 FORScan List / Database / Spreadsheet

[backcountryplatinum]

Is there an advantage or disadvantage to using the "easy" option in forscan for Tire Size in MMs vs using the As Built option and changing the code?

Thanks.

Sponsored

 

[M.R.F.O.R.D.]

I had the 20s. 275/60/20.

that sounds eerily close to what mine was set at.

again, if anybody has a way to revert to factory BCM let me know! Can the dealership not flash it?

These are my factory settings Stock 20 inch same size

BCM: 726-15-01 ->	xxxx	xxxx	09xx
BCM: 726-15-02 ->	F3xx	xxxx	xxxx

 

[backcountryplatinum]

These are my factory settings Stock 20 inch same size

BCM: 726-15-01 ->	xxxx	xxxx	09xx
BCM: 726-15-02 ->	F3xx	xxxx	xxxx

if i update these will this override the “easy” change I made prior?

 

[M.R.F.O.R.D.]

if i update these will this override the “easy” change I made prior?

yes then you need to do the PCM/TCM Relearn procedure

 

[Micho523]

What happened to the Ford Performance / Raptor splash screen? I no longer see it listed.

It's under the APIM tab, row 1258

 

[M.R.F.O.R.D.]

if i update these will this override the “easy” change I made prior?

This is where you do the relearn.

 

[backcountryplatinum]

Hello - Me again - How do I reset my transmission shift tables in Forscan? I did the PCM relearn when I changed my tires. Is that it? Thanks!

 

[sharper4]

Hi folks- 2022 powerboost I adjusted tire size the “easy” way by manually inserting my new circumference in MM. I didn’t write down the original value (2500 something). Is there a way to find out the original value? Is there a way to get the BCM back to original? I didn’t save anything as I haven’t modded anything before and you can’t save easy mode. Rookie move.

thanks!

I'm pretty sure there is a "restore" button next to the "write" button. I had screen saved all my settings on my '24 before trying the Glare Free (which doesn't work on '24s yet). I decided to take all the settings back to stock and found that the restore button worked just fine for me.

 

[5.0rattlenoise]

Does anyone know how to disable trailer routing notifications (e.g., height restriction "bong" noise) using forscan? The only way I can find how to do this is to get a subscription to navigation which I'm not about to pay for .

 

[Hyins]

Does anyone know what these config parameters mean?

Boundary_Alert_Cfg (BAC) in DDM/PDM
KeylifeTesting_Cfg (KTC) in DDM/PDM
FeatCfg_Feat0_PERS1 (FCFPERS) in DDM/PDM
CSM_WinStat_Cfg (CSMWSC) in BCM
BackLighting2Ckt_Cfg (BLCC) in BCM
WhiteLightCkt_Cfg (WLCC) in BCM
Dim II Control Mirror (DIICM) in IPC
Blindspot Trailer Tow Lite (BTTL) in IPC
Reverse Mirror (RM) in IPC
Drive Mode Control Mirror (DMCM) in IPC

 

[superfordman]

Does anyone know what these config parameters mean?

Boundary_Alert_Cfg (BAC) in DDM/PDM
KeylifeTesting_Cfg (KTC) in DDM/PDM
FeatCfg_Feat0_PERS1 (FCFPERS) in DDM/PDM
CSM_WinStat_Cfg (CSMWSC) in BCM
BackLighting2Ckt_Cfg (BLCC) in BCM
WhiteLightCkt_Cfg (WLCC) in BCM
Dim II Control Mirror (DIICM) in IPC
Blindspot Trailer Tow Lite (BTTL) in IPC
Reverse Mirror (RM) in IPC
Drive Mode Control Mirror (DMCM) in IPC

Nope, not really, would need some input from @Livnitup if anything. Usually if you can't decipher what they mean, don't mess with them.

 

[Livnitup]

Does anyone know what these config parameters mean?

Boundary_Alert_Cfg (BAC) in DDM/PDM
KeylifeTesting_Cfg (KTC) in DDM/PDM
FeatCfg_Feat0_PERS1 (FCFPERS) in DDM/PDM
CSM_WinStat_Cfg (CSMWSC) in BCM
BackLighting2Ckt_Cfg (BLCC) in BCM
WhiteLightCkt_Cfg (WLCC) in BCM
Dim II Control Mirror (DIICM) in IPC
Blindspot Trailer Tow Lite (BTTL) in IPC
Reverse Mirror (RM) in IPC
Drive Mode Control Mirror (DMCM) in IPC

Boundary_Alert_Cfg (BAC) in DDM/PDM - A configurable parameter enabling or disabling the power windows automatic roll up feature.
KeylifeTesting_Cfg (KTC) in DDM/PDM - I don't see this in DDM/PDM
FeatCfg_Feat0_PERS1 (FCFPERS) in DDM/PDM - I don't see this in DDM/PDM
CSM_WinStat_Cfg (CSMWSC) in BCM - Enable/Disable CSM Window functionality.If the vehicle has smart window motors, this needs to be enabled so the BCM can send the window status to CSM thru LIN
BackLighting2Ckt_Cfg (BLCC) in BCM - Method 2 configuration to decide for which application Backlighting2_LED_Ckt will be used
WhiteLightCkt_Cfg (WLCC) in BCM - Indicates if White Lighting circuit is used or not.
Dim II Control Mirror (DIICM) in IPC - I don't know
Blindspot Trailer Tow Lite (BTTL) in IPC - I don't know
Reverse Mirror (RM) in IPC - I don't know
Drive Mode Control Mirror (DMCM) in IPC - I don''t know

 

[22Platinum]

Does anyone know the parameter to change to ignite turn signals with DRLs?

There is a thread here about someone replacing their grill or headlights, he replaced something and when he put up an image of whatever he replaced he had his turn signals on with his DRLs, and I cannot find it. He goes on to incidentally list the forscan change.

ETA:
726-43-01
x2x2 xxxx xx--
became
x1x1 xxx xx--

This gave me turns during DRL, turns when turn signal activated, but no turns ignited with selector in "parking lights". I think x4x4 is the way

I'd like to have:
- no lights in the off position
- only parking lights AND turn signals in the parking lights position
-DRL AND parking lights AND turn signals in the auto on position (with headlights AND parking lights AND DRLs when dark outside/the lights come on)
- ONLY headlights AND parking lights on in the ON position

 

[jhelrey]

Has anyone figured out how to keep the truck from putting itself into park when you open the door?

 

[HammaMan]

Has anyone figured out how to keep the truck from putting itself into park when you open the door?

Seat belt status - no seat belt = park. In the mach e w/ the door open I have to manually hold the e-brake OFF else it locks right up on release w/ door open.

Sponsored