Search results

I need to find some time this week to compare the 26 info to the 24-25s and see if anything is different. If I find some differences I'll add 26-only sheets or rename the existing ones to 24-26 if they're the same

Some module updates in FDRS include asbuilt changes but others don't. If you save your changes after doing a particular change in FORScan and then get a module update that changes it you can revert the changes back and it will stay. TRON doesn't permanently set any asbult values; it's only...

Correct

Don't worry about the dashes; it's a checksum (a mathematical sum of all the prior hex digits in that line) that FORScan will calculate for you.

The 24-25s have it enabled in BCM 726-89-02 that we don't have.

Message me or post your VIN

I realize the cluster will stay on but maybe you can exit the generator screen and turn the Sync display off?

I added Silent Mode to the Common spreadsheet today. This feature is a Sync toggle that will suppress all approach lighting, lock/unlock lighting, courtesy lights until truck is turned on.

What are you going into service for? If just routine oil change then don't worry about anything. An OTA can configure a module (make asbuilt changes) so if you've gotten a BCM OTA for example then it's likely there are a few changes different than your original backup prior to the OTA but no...

I've added values for adding an OEM Trailer Brake Controlller to a truck that didn't originally ship with it here on my common spreadsheet.

I've added programming values for 2021-25 vehicles at the bottom of my Common Spreadsheet here

Yeah it looks like you already tried everything I would normally suggest to someone whose adapter isn't finding the MS-CAN modules at all. Maybe try resetting the GWM in FORScan (wrench icon), then delete profile and try connecting again to see if that does anything. You might also message...

Both mine and the other thread have the same value; you ignore whatever you have where the x's are and just put the 1 where indicated

I should have also said to make sure you back up each module I listed above before any changes by clicking the "save all" button at the bottom of the screen.

Try the values below in the modules indicated. Ignore whatever you have where the x's and dashes are. After making the changes reset the APIM (FORScan wrench icon). IPC 720-07-01 xxxx xExx xx-- BCM 726-69-02 xxxx x1xx xx-- TRM 791-01-02 xxxx x3-- APIM 7D0-09-03 xxxx xxx4 xx-- IPMA...

Message me (or post) your vin and I'll give you the exact values & modules you should need and if it works then I'll add this to my common spreadsheet.

It's a battery voltage, not SOC: IPC 720-06-01 xxFx xxxx xx--

I just generated a 24 Lightning-specific IPMA sheet here so have a look at that

Read my FORScan tutorial here

The "Last Revised: 7/30/24" refers to the common spreadsheet only. If I become aware of a 2024 module that is different than the same 21-23 module then I will add that specific 2024 spreadsheet but there is no revision date that reflects when I do that. I have no idea if/when a tailgate cam...