2021 Owners - What is your OTA Version?

[Blueshound]

2021 Job 1 XLT 302A 5.0
6.2.0 received Feb. 19, 2024

Sponsored

 

[deagle2008]

mine is an 01/21 and its stuck on 6.3 not completed. : (

 

[shalabama]

2021 job 1 currently on 6.4 received OTA on 12/5.

Have previously kept up albeit a few weeks behind until I dropped off Ford’s radar.

What‘s going on???

Updated status.
Hit the mother load today
Received three OTA updates back to back to back:
6.5.0
23-PU0813-DOR-UP2
23-PU0110-RAD-PS

Hope springs eternal once again!

 

[Big Dog Daddy]

I have a 2021 J1 Truck it was frozen on the 1.7.1 update until the middle of 2022 when it was fixed using FDRS. Since then, the truck has received every applicable OTA.

01/24/23​	3.5.3
02/16/23​	22-PU1009-TLC-CSM
02/24/23​	22-PU1007-DOR-UP
04/24/23​	4.2.1
05/02/23​	4.2.2
05/04/23​	4.2.3
05/05/23​	4.2.4
06/19/23​	4.3.2
06/21/23​	4.3.3
08/11/23​	4.3.5
09/17/23​	4.3.6
09/18/23​	6.1.0
10/25/23​	6.2.0
11/21/23​	2.7.4
11/30/23​	6.3.0
12/05/23​	6.4.0
12/11/23​	6.5.0
12/13/23​	23-PU0813-DOR-UP2
12/19/23​	6.8.0
01/11/24​	22-PU1009-TLC-CSM2
01/29/24​	23-PU0110-RAD-PS
02/10/24​	23-PU1009-SS-NS

ADD 02/21/24 23-PU.1113-UNX-DC. First Reported on the forum this morning it installed on my truck tonight at 5:30 pm

 

[KTM753]

2021 Job 1. From Rugedraw: "Last APIM OTA recorded was 11/1/2022. Your truck is pretty far behind on Sync 21233"

Guess I will have to spring for a Mongoose cable and FDRS to get up to date...

 

[ColoradoHunter]

2021 job 1 last update was on 1/8/24 4.2.4

 

[Dadofjax]

Where do you guys see a list of updates your truck recieved. I had the battery issue so guessing I missed some updates but will check after work where it's sitting.

 

[rugedraw]

Where do you guys see a list of updates your truck recieved. I had the battery issue so guessing I missed some updates but will check after work where it's sitting.

Even though I would be the one to check for you, post your request in the VIN check thread stickied in this section.

 

[Cobraman428]

Finally got 6.4.0 on 3/13/24

21 Job 2 - The Last two I have received.
6.1.0 10/20/23
4.36 10/18/23

 

[RichP]

I got 6.2.0 last week. Then 6.3.0 downloaded and failed so I'm stuck again.

 

[Cobraman428]

Got my 6.5.0 update last night. Keep them coming OTA god...
6.5.0 3/22/24
23-PU0630-YAW-RT 3/20/24
6.4.0 3/13/24
6.1.0 10/20/23
4.36 10/18/23

 

[Cobraman428]

Just got another notice that tonight 23-PU0110-RAD-PS is being installed. 4 OTA within 10 days. WOW...

 

[PlatinumPat]

I have a 21 I purchased six months ago that has not had updates in a long time. I think I’m having battery problems also. Was curious on what battery you end up going with on your replacement?

I may have to do the same thing for mine I just bought a month ago - 21’ PB…let me know which battery you decide. I got low battery errors after receiving the truck, from likely sitting for a while.

 

[PlatinumPat]

Got my 6.5.0 update last night. Keep them coming OTA god...
6.5.0 3/22/24
23-PU0630-YAW-RT 3/20/24
6.4.0 3/13/24
6.1.0 10/20/23
4.36 10/18/23

I’m having an issue with mine installing it seems…”interrupted by other processes” has been the error…gonna try again now after remote start from what I hear

 

[stang]

So, After a loooooong time (2+years) without any OTA updates, it appears the dealer has fixed my issue.

From Ford write up:

CUSTOMER IS STILL NOT GETTING OVER THE AIR UDATES, THEY SPOKE TO SOMEONE AT FORD AND THEY SAID THE VEHICLE NEEDS TO BE LOOKED AT BY THE DEALER. PLEASE CHECK AND ADVISE CHECKED SYSTEMS FOR DTCS WITH FDRS. HAD A COMMUNICATION CODE BETWEEN ABS AND APIM, U0253 IN THE ABS MODULE. FOUND SSM FOR

THE DTC. REPROGRAMED THE ABS MODULE AND CLEARED THE SYSTEM. CHECKED FOR SW UPDATES AND REPROGRAMED THE ACM. REPROGRAMED THE GWM AND IT FAILED 2 TIMES. I TRIED A NEW FDRS AND USB DRIVE AND IT FINALLY WENT THROUGH AND ALL THE NUMBERS PASSED THIS TIME. BEFORE I TRIED THE NEW FDRS I TRIED A HARD REBOOT AND A MASTER RESET. AFTER THE GWM UPDATE AN APIM SW UPDATE APPEARED ON FDRS SW LIST. I PERFORMED THE APIM SW REPROGRAMING AND IT PASSED. RETESTED AND ALL PASSED.

--End Write up----

About 2 days after, I received my first update. Heres where I am so far:

OLD SOFTWARE VERSION (2/12/2022):
Sync 4, Software Version: 21223_PRODUCT
Revision: 197


3-14-2024
Sync 4, Software Version: 22192_PRODUCT (also known as 3.5.2)
Revision: 498


3-22-2024
Sync 4, Software Version: 22293_PRODUCT (also known as 3.5.3)
Revision: 610

I'm confident that the truck will start getting all of the updates over the next few weeks. Just thought I'd pass it along in case anyone else has issues. I couldn't have kept on without all the awesome suggestions and guidance from here and other forums.


One thing the ford software reps told me is that the following criteria has to be met in order to have an update initiate:

- fuel level for update must be at 92% or above
- in vehicle wifi enabled
- vehicle parked
- schedule update for when you will have full fuel
- parking brake set
- lights set to auto or off
- ignition off, doors, trunks closed
- oil life should be better than 30%
- needs to be driven for at least 30 minutes so, the battery gets charged for the update


Everyone has helped me soo much, I hope that even 1 of these things gets your updates going! GL!

Sponsored