Turn Signal Cameras???

[Jesse-Infotainment]

With the sync updates, are new variables starting to pop up or are they limited to the 23 APIMs?

APims are the same. Software is changing adding newer items.

Sponsored

 

[antho]

 

[B-real]

Bummer about it not just being a Forscan change on a 21, but I will be doing it on my 23.

 

[antho]

Bummer about it not just being a Forscan change on a 21, but I will be doing it on my 23.

Im sure it’ll work eventually. I haven’t looked to see where a fully updated 21 ipma is software wise yet.

 

[DK4]

Woa. Ok broseph, what changes do we need to enable for this? Is it still when a trailer/device is detected only?

 

[FORDTEXAS]

my passengers would go nuts if i had this enabled lmfao!

 

[antho]

Woa. Ok broseph, what changes do we need to enable for this? Is it still when a trailer/device is detected only?

Yeah. Only works when a trailer is connected.

TRAILER TSV
IPMA	706-01-02	*xxx	xxxx	xx--	TURN SIGNAL VIEWS
APIM	7D0-02-03	xxxx	x*xx	xx--	TRAILER SIDE VIEWS (TURN SIGNAL VIEWS)

 

[crazywayne311]

will this work on a 22? i have a early 22 with no deletions haha

 

[m_bt54]

my passengers would go nuts if i had this enabled lmfao!

Honda has had this forever. I had it on an Accord 10 years ago and loved it. I’m not sure it would be as useful with the existing F150 cameras as I’m not sure they are at the best angle but would still be nice to have.

 

[Aron]

will this work on a 22? i have a early 22 with no deletions haha

I'm planning to try to get this installed at lunchtime, so I'll let you know. Coincidentally, I have a trailer hooked up at the moment.

 

[crazywayne311]

I'm planning to try to get this installed at lunchtime, so I'll let you know. Coincidentally, I have a trailer hooked up at the moment.

this is why i love this forum haha no one seems afraid to jump in. let me know. i'll find a trailer on the job here and see if it works on mine if it works on yours

 

[travisN000]

I'm curious if your changes will also work just by just putting the truck in tow/haul mode, or do you actually have to have a load on the trailer plug?

@B-real
Thats actually the correct values to change. I have had this for a few months but had to update my IPMA software to a 23. You have to have a trailer connected or a light plugged into the trailer connector with enough voltage draw for it to work. I used an old Rigid Industries pod light to test. With your truck being a 23 it may just be forscan changes for you.

 

[antho]

I'm curious if your changes will also work just by just putting the truck in tow/haul mode, or do you actually have to have a load on the trailer plug?

There has to be a voltage draw on the trailer connector.

 

[powerboatr]

dude
get to work ?
this would be excellent if we could add this 22 models
i have in my motorhome and its 10 years old

 

[Mszczewski]

There has to be a voltage draw on the trailer connector.

What gets disabled when we have a trailer hooked up?

Sponsored