2021 f150 platinum hybridWhich vehicle?
I already updated pscm two days ago.it was same ping pong issue with stable version.The best thing would be to update your PSCM with FDRS. But until then you can try the branch staging-1.1which has a lot of tuning parameters. Info on how to tune them is in the readme file.
And my front camera isn’t working as well when approaching to any object at speed under 10 km/hI updated pscm but I will try 1.1 staging setting
sorry dear I was at theatre at that timeThis sentence doesn’t make sense. I think we have a language barrier. The camera goes black and doesn’t show anything when going slow?
I have to activate front camera manually to see what’s front of the vehiclesorry dear I was at theatre at that time
I was saying my f150’s front camera doesn’t come on when it’s approaching to any object at front but sensors working.
I have to activate front camera manually to see what’s front of the vehicle
yes dear I know it’s not related to comma device but i was wondering if something need to change with forscan because it was working before but after recent ipma software update it’s stoppedOh, I see. This shouldn’t be related to Comma at all, I’ve certainly never seen it. If you upload the route and link it I can take a look, but we don’t touch those signals.
I'd hit up the FDRS thread, much more likely to find an answer there.yes dear I know it’s not related to comma device but i was wondering if something need to change with forscan because it was working before but after recent ipma software update it’s stopped
sorry to bother you dear. I am asking too many questions.yes dear I know it’s not related to comma device but i was wondering if something need to change with forscan because it was working before but after recent ipma software update it’s stopped
yes dear I know it’s not related to comma device but i was wondering if something need to change with forscan because it was working before but after recent ipma software update it’s stopped
Start with Lane Change Factor: 0.65sorry to bother you dear. I am asking too many questions.
I wonder If you can suggest best settings for staging version 1.1 to do or you can post video on YouTube for the settings you did for your comma 3x
With suggested settings blue pilot working perfectly now thanks dearStart with Lane Change Factor: 0.65
Low Curvature PC Factor: 0.40
High Curvature PC Factor: 0.60
HIgh Curvature Factor: 0.98
if you have fast ping pong, make the PC factor lower, if you have fast ping pong, make the PC factor higher.