ECU module programming guide using FDRS

[Foxtrot150]

I honestly don't think I will ever get an OTA update, because my battery SOC is crap. My truck is still under warranty but the dealer said they can't replace it under warranty due to it passing the test on their tester. I will give it a while and see if it ever comes through.

I feel like I'm in the same boat!

Sponsored

 

["Steve"]

looks like i have some work to do. i've been at 3.5.2 or whatever for a couple months. dunno if i should expect the gwm and apim ota any time soon.

 

[Caneman88]

Just got this How do I charge my truck ???

 

[Snakebitten]

Flip the breaker.
It's obviously not hot

 

[Gears and Gadgets]

Just got this How do I charge my truck ???

I was just showing my wife the same thing and laughing. I can’t figure out where the plug is.

 

[DanTerepka]

Anyone have this come up on the APIM update.

i belive this is one of the last larger updates.
I have updated FRDS, as well as restarted it multiple times with no results. Any help is greatly appreciated!

 

[Jesse-Infotainment]

Anyone have this come up on the APIM update.

i belive this is one of the last larger updates.
I have updated FRDS, as well as restarted it multiple times with no results. Any help is greatly appreciated!

Yeah.> it has happened to several. Send me your vin. I can grab the update for you

 

[DanTerepka]

Yeah.> it has happened to several. Send me your vin. I can grab the update for you

1FTFW1E82MFA71779

 

[Jesse-Infotainment]

1FTFW1E82MFA71779

Give me a few

 

[dzacco]

Is there a reason why everybody is using the Mongoose in lieu of the VCX Nano for under $100? I'm reading that it works with FDRS

Never Mind,
I found a post from Iceman that says it is no longer compatible.

 

[Ford4Ever]

Because the VCX Nano isn't recommended by Ford and could and has caused problems.

 

[jordandev]

Is there a reason why everybody is using the Mongoose in lieu of the VCX Nano for under $100? I'm reading that it works with FDRS

I used the Nano to do all my updates (because I'm cheap). However it has some big issues:

• Can brick the CCM during update (I don't have a CCM on my 302A)
• corrupted data often happens during a Network Scan (so you would want to avoid running one which makes the whole process take longer as you have to wait for the truck to self report)

 

[XLT22]

There also may or may not be Chinese spyware in the software used to run the VCX products. I have used one before in a pinch on a GM vehicle but would keep in a virtual machine environment only.

 

[RellIk&5]

Bought a license yesterday to update my 22 Raptor. I did a set of FDRS updates when I bought my truck last October. I received a single OTA in Jan (3.5.2.2) and then nothing since. My updates yesterday included 3 Gateway updates, 1 APIM update and 1 TCU update. I also had a headlight update, a BCM update, and a Anti-Lock Brake unit update. Of those last three, I only applied the anti-lock brake update.

Anyone applied the recent BCM or headlight updates? Any reason I should? I have glare-free enabled. I know my FORSCAN changes have propagated up to the Ford servers because I made those changes in December of last year and haven't messed with FDRS until yesterday and my FORSCAN changes were unaffected.

 

[Jesse-Infotainment]

Bought a license yesterday to update my 22 Raptor. I did a set of FDRS updates when I bought my truck last October. I received a single OTA in Jan (3.5.2.2) and then nothing since. My updates yesterday included 3 Gateway updates, 1 APIM update and 1 TCU update. I also had a headlight update, a BCM update, and a Anti-Lock Brake unit update. Of those last three, I only applied the anti-lock brake update.

Anyone applied the recent BCM or headlight updates? Any reason I should? I have glare-free enabled. I know my FORSCAN changes have propagated up to the Ford servers because I made those changes in December of last year and haven't messed with FDRS until yesterday and my FORSCAN changes were unaffected.

BCM should come OTA if you updated everything else. It is fine to install if you want to manually. THE HCM is for a flicker issue I believe.

Sponsored