ECU module programming guide using FDRS

[TJSparky]

The PMI didn't do anything but Antho is looking at the As Built data now.

Sponsored

 

[Jesse-Infotainment]

The PMI didn't do anything but Antho is looking at the As Built data now.

Ok.

 

[antho]

I dont see anything crazy. Only change between the file you shared and whats on the "server" are below. Dont know when the "server" data updated but these are the only differences.

DRL ARE SET TO 10% AND FOGS WITH HIGHBEAM DISABLED

DRL_Ckt_FixedDim_DutyCycle_Cfg
726-38-01 0164-4600-0011
726-38-01 0164-0A00-00D5 - CURRENT

FrontFog_WithHighBeams_Cfg (FFWHBC)
726-39-02 0100-0000-0069
726-39-02 0101-0000-006A - CURRENT

 

[TJSparky]

I dont see anything crazy. Only change between the file you shared and whats on the "server" are below. Dont know when the "server" data updated but these are the only differences.

DRL ARE SET TO 10% AND FOGS WITH HIGHBEAM DISABLED

DRL_Ckt_FixedDim_DutyCycle_Cfg
726-38-01 0164-4600-0011
726-38-01 0164-0A00-00D5 - CURRENT

FrontFog_WithHighBeams_Cfg (FFWHBC)
726-39-02 0100-0000-0069
726-39-02 0101-0000-006A - CURRENT

Ya 726-39-02 is the bambi mode
726-38-01 is the DRL brightness I change backed from 70% to 10%(stock)

 

[TJSparky]

Jesse- If you can help load the firmware back I'd appreciate trying that.

Unless the LED module for the Left Headlight just fried for no reason.

 

[antho]

@TJSparky
Do the turn signals or hazards work? Can you try your 360 lighting?

 

[TJSparky]

@TJSparky
Do the turn signals or hazards work? Can you try your 360 lighting?

Yes the amber turn signals and hazards work and all the other LED lighting works, 360 lighting, except the left headlight.

 

[antho]

Yes the amber turn signals and hazards work and all the other LED lighting works

@TJSparky
When you do the 360 lighting the left headlamp works?

 

[TJSparky]

@TJSparky
When you do the 360 lighting the left headlamp works?

No Left headlight does not light up either with the 360 lighting.

 

[antho]

@TJSparky
May be worth checking the fuse. Under the hood. Left headlamp shows to be fuse 100. (15A)

 

[Jesse-Infotainment]

Jesse- If you can help load the firmware back I'd appreciate trying that.

Unless the LED module for the Left Headlight just fried for no reason.

Im home. I can revert it. I do find it wierd.. Any notification in the cluster of a lamp out?

 

[TJSparky]

@TJSparky
May be worth checking the fuse. Under the hood. Left headlamp shows to be fuse 100. (15A)

LOL, great minds think a like. ya I looked at it and the fuse was fine. Even tried a different 15A fuse too.

 

[TJSparky]

Im home. I can revert it. I do find it wierd.. Any notification in the cluster of a lamp out?

No notification of any lamp out either. Let me know what you need me to do. I REALLY appreciate all your help guys.

 

[antho]

Only other thing i could think of is a BCM Lin new module recognition or whatever its called.

 

[Jesse-Infotainment]

Only other thing i could think of is a BCM Lin new module recognition or whatever its called.

Yeah.. Its possible. The update runs a lin bus initialization. Ill remote in and take a look and try that if not Ill roll it back

Sponsored