2021+ F-150 FORScan List / Database / Spreadsheet

[Nightshade]

I never realized that they didnt have a gear or rpm in there. Kind of silly that its just empty. @Nightshade

Right, I was exactly thinking the same thing. I didn't think much of it until I realized that on my last truck (also a '24 Lariat) didn't have it either, honestly felt 'unfinished' and a downgrade compared to 21-23 year. I haven't looked much into the gear/rpm part to restore it back into the circle but I don't see why it can't be added back in?

If it can't, then it may be just Raptor specific, just like all the measurements and other features we have over the regular F-150s.

Sponsored

 

[M.R.F.O.R.D.]

Did this work for you? I have the RPM numbers in the middle on my '24 Raptor but when I did the above change on a friend's '24 F-150 Lariat (502A), it didn't change anything--RPM numbers didn't show up.

Sorry I didn't have a chance to play around with this yet. It too cold to sit in the truck right now.

 

[Nightshade]

Sorry I didn't have a chance to play around with this yet. It too cold to sit in the truck right now.

No worries at all—same out here too; getting worse colder temperatures next week. Yay lol

 

[Spiffy]

I followed the link earlier up in this thread to the forscan list. I assume it current. I don't see anything related to bluecruse settings. Am I missing something?

 

[windowsmedia10]

Would appreciate if someone can figure out how to get both the digital RPM readout in the middle of the tachometer on MY24/25 trucks and not have to click the gear up button to have the 1-10 gear numbers displayed on the dash.

 

[nitrobass24]

Anyone know if its possible show the RPMs when in Bluecruise?

 

[rugedraw]

I followed the link earlier up in this thread to the forscan list. I assume it current. I don't see anything related to bluecruse settings. Am I missing something?

If you're looking for the FORScan changes to enable the lane change and the other new BC features, those are not posted publicly yet.

 

[ongrade]

So I made a few changes to my 2023 501A Lariat and have an issue, Trailer side view doesn’t work, the menu item is there but I can’t turn it on and the cameras don’t work when the turn signal is on. I tried it in the driveway with the truck in gear, brake released, and trailer plugged in. Went back and double checked the code and it’s all correct.
Appreciate any help

 

[EdmontonF150]

Hey group! I am looking to enable on board scales on my '24 lariat with 501a package. I have the sensors on all 4 corners of the suspension and the VDM module on the frame. Did anyone ever get this to successfully work? I have seen in a few threads people were looking at this but wasn't sure if it was ever done.

Thanks for any help you can provide.

Finally got a chance to change a few settings, I changed the scales setting in the APIM to enabled. I didn’t see anything to change in the VDM module. It enabled the button in the menu but gives me an error.
Does anyone have any ideas?

 

[antho]

So I made a few changes to my 2023 501A Lariat and have an issue, Trailer side view doesn’t work, the menu item is there but I can’t turn it on and the cameras don’t work when the turn signal is on. I tried it in the driveway with the truck in gear, brake released, and trailer plugged in. Went back and double checked the code and it’s all correct.
Appreciate any help

I would start by telling us what you enabled and in what modules to try to get the trailer side views to work? @ongrade

 

[ongrade]

@antho
IPMA 706-01-02 3xxx xxxx xx—
APIM 7D0-02-03 xxxx x8xx xx—
The menu item is there, but I can’t toggle it on.
I double checked these values against the module spreadsheets and they appear to be valid for my truck

 

[BeNimble]

The "Last Revised: 7/30/24" refers to the common spreadsheet only. If I become aware of a 2024 module that is different than the same 21-23 module then I will add that specific 2024 spreadsheet but there is no revision date that reflects when I do that. I have no idea if/when a tailgate cam IOD might be available but I haven't seen it on 2025 apim software so I wouldn't hold my breath.

Livinitup--I am new to this forum and just upgraded from 2008 F-150 Lariat SCC to 2024 F-150 XLT SCC 302A with RTR custom upgrades. I am doing the early research regarding upgrading my mirrors to power fold and want to understand the FORScan and how to make the code changes you and others posted. What is the best tutorial and what equipment do I need?

Thank you in advance for your assistance.

BeNimble

 

[Livnitup]

Livinitup--I am new to this forum and just upgraded from 2008 F-150 Lariat SCC to 2024 F-150 XLT SCC 302A with RTR custom upgrades. I am doing the early research regarding upgrading my mirrors to power fold and want to understand the FORScan and how to make the code changes you and others posted. What is the best tutorial and what equipment do I need?

Thank you in advance for your assistance.

BeNimble

Read my FORScan tutorial here

 

[rugedraw]

@antho
IPMA 706-01-02 3xxx xxxx xx—
APIM 7D0-02-03 xxxx x8xx xx—
The menu item is there, but I can’t toggle it on.
I double checked these values against the module spreadsheets and they appear to be valid for my truck

Your IPMA software may not be current enough to support the feature.

 

[antho]

@antho
IPMA 706-01-02 3xxx xxxx xx—
APIM 7D0-02-03 xxxx x8xx xx—
The menu item is there, but I can’t toggle it on.
I double checked these values against the module spreadsheets and they appear to be valid for my truck

@ongrade Check this value below
706-35-01 xxFx-xxxx-xx-- CustomerSetting_TurnSglViewOnOff (CSTSVOO)
You may also just be behind on the software like @rugedraw mentioned but the value above is worth a shot.

Sponsored