Look of 1"-1.5" front lift with OEM tires

[skiteton]

I have a 2024 Lariat FX4 and am considering raising the front end, solely for looks. I don't want to go 2" because I think that will look strange with OEM wheels/tires.

Has anyone done a 1"-1.5" front lift with OEM wheels/tires and have pictures?

Thank you in advance.

Sponsored

 

[Rineland]

I did the Bilstein 5100 kit and set it at 1.5”. I wanted to retain some rake for towing and I haul my sled in the bed in the winter. I can grab some more pics today if you want some different angles.

 

[24PB]

I did the Bilstein 5100 kit and set it at 1.5”. I wanted to retain some rake for towing and I haul my sled in the bed in the winter. I can grab some more pics today if you want some different angles.

I for one would like to see some more pics!

 

[NH-RCSB]

I did the Bilstein 5100 kit and set it at 1.5”. I wanted to retain some rake for towing and I haul my sled in the bed in the winter. I can grab some more pics today if you want some different angles.

The 1.5" front lift makes a big difference. I'm surprised ! Did you remove the rear factory blocks ?
I have an XL, RCSB, 4x4 on order. I'm looking for ideas for leveling it out.

Thanks.

 

[FaaWrenchBndr]

The 1.5" front lift makes a big difference. I'm surprised ! Did you remove the rear factory blocks ?
I have an XL, RCSB, 4x4 on order. I'm looking for ideas for leveling it out.

Thanks.

Removing the rear blocks will get you about 1 inch of rake. It is advised to replace the u-bolt as they are considered to not be reusable. If you order u-bolts you’ll want 2wd u-bolts

They will cost you about 100 at your dealer

 

[NH-RCSB]

Removing the rear blocks will get you about 1 inch of rake. It is advised to replace the u-bolt as they are considered to not be reusable. If you order u-bolts you’ll want 2wd u-bolts

They will cost you about 100 at your dealer

Thank you for the info

 

[Blue22]

As many pictures I take of my truck and the mods I do, surprisingly this is the only picture I have of my stock tires with 1.5" of lift on the Bilstein 5100s. I think I only took one picture because I was in such a hurry to put on the new tires.

 

[ezndo]

Ford performance leveling kit, rear blocks removed, gives 1/2” rake, about as close to level as possible

 

[NH-RCSB]

Ford performance leveling kit, rear blocks removed, gives 1/2” rake, about as close to level as possible

Damn, That Looks Good.
I ordered Antimatter blue,.. should have gone with Black !!

 

[NMMIKE]

How is the ride after putting Bilstein 5100s set at 1.5" and removing rear blocks?
I put the rear 5100s on and think that they are great.

 

[Nevadajack]

1.5 Fabtech pucks up front with stock tires.

 

[Rineland]

I for one would like to see some more pics!

Happy to oblige!

I also grabbed some measurements to the fender arch. Front: ~38” Rear: ~41”. So there’s still 3” of rake. I do have the standard duty RAS installed in the rear which I think picks up the back end like 0.5-0.75”. It had a lot of rake from the factory since it’s the max tow package. I don’t remember what it was exactly but it was over 4”.

 

[Franco1]

I have a 2024 Lariat FX4 and am considering raising the front end, solely for looks. I don't want to go 2" because I think that will look strange with OEM wheels/tires.

Has anyone done a 1"-1.5" front lift with OEM wheels/tires and have pictures?

Thank you in advance.

While my F150 us a 2015 i did the 2" lift with OEM Tires looks great,I'm considering moving up to a taller tire for a even better stance.

 

[Larrymoe]

Ford performance leveling kit, rear blocks removed, gives 1/2” rake, about as close to level as possible

I normally don't like those wheels, but they look fantastic with that truck.

 

[Larrymoe]

1.5 Fabtech pucks up front with stock tires.

Are those the Police package wheels?

Sponsored