Heated Steering Wheel Retrofit - updated with information

[The_ogre25]

So I know some people are using the heated / cooled climate controls with the heated steering wheel button and I know it is fairly involved to get it to work without the DSM, but does anyone know if the bronco climate controls like the one pictured would work?

I tried a 23 Bronco module in my 23 XLT and I got codes for shorted humidity and temperature sensor. The driver side temp control also appeared to be reversed, I had heat output at all temp settings from LO to 85, then I got cool air at HI setting.
I was going to download the wiring diagrams to see if a swap harness could be made but have been working so much I haven't had time.
The F150 knobs and recirc button swap right in also.

Sponsored

 

[AntimatterJoe]

I tried a 23 Bronco module in my 23 XLT and I got codes for shorted humidity and temperature sensor. The driver side temp control also appeared to be reversed, I had heat output at all temp settings from LO to 85, then I got cool air at HI setting.
I was going to download the wiring diagrams to see if a swap harness could be made but have been working so much I haven't had time.
The F150 knobs and recirc button swap right in also.

I understand that, I’ll try to see if I can get time as well. If you find out before me, please let me know

 

[FORDTEXAS]

the god damn SCCM went back up in price ??

 

[mkinttrim]

the god damn SCCM went back up in price ??

What is it now? I got a new one off of Ebay from a ford dealer 5 weeks ago, it was $245

 

[FORDTEXAS]

What is it now? I got a new one off of Ebay from a ford dealer 5 weeks ago, it was $245

ranges from 200-250 but them f*ckers were less than 100 bucks a few months ago.

 

[Blochead21]

ranges from 200-250 but them f*ckers were less than 100 bucks a few months ago.

https://www.tascaparts.com/oem-parts/ford-column-housing-ml3z3f791bb

 

[FORDTEXAS]

https://www.tascaparts.com/oem-parts/ford-column-housing-ml3z3f791bb

yes i seen that but i believe that is not the right SCCM. the part number doesn’t match any of the listed SCCM in the supplement list from FORD.

 

[Blochead21]

yes i seen that but i believe that is not the right SCCM. the part number doesn’t match any of the listed SCCM in the supplement list from FORD.

It’s correct. Take a look through this thread and the numerous people who have installed it successfully.

 

[mkinttrim]

ranges from 200-250 but them f*ckers were less than 100 bucks a few months ago.

Oops I was thinking of the wrong part. I paid $46.

 

[FORDTEXAS]

It’s correct. Take a look through this thread and the numerous people who have installed it successfully.

i kinda want to believe you but reading through 90 pages is a nightmare chief..

 

[JScaro]

i kinda want to believe you but reading through 90 pages is a nightmare chief..

Try the search icon…. Works pretty good.

 

[Je1279]

Try the search icon…. Works pretty good.

Using the advanced search, you can limit the search to a specific thread which is very helpful.

 

[FORDTEXAS]

Try the search icon…. Works pretty good.

i got too lazy to do things nowadays lol

 

[mkinttrim]

Do when replacing the steering wheel do I need to changeout the left hand controls from my old steering wheel to the new one? I don't have adapted cruise Lariat 501A

 

[HammaMan]

Do when replacing the steering wheel do I need to changeout the left hand controls from my old steering wheel to the new one? I don't have adapted cruise Lariat 501A

If the controls are different for your options, yes.

You can swap the entire trim assembly in one go w/ buttons attached. Very easy.

Sponsored