speedracercjr
Well-known member
Preach!Good to know. Im not patient.
Sponsored
Preach!Good to know. Im not patient.
Whats weird is I never did a master reset. Just today I noticed that all my Nav favs were gone. (Didn't check them after the update). Just wondered when I did the upgrade, did it do its own master reset. I never lost my nav favs unless I did a master reset. On the other hand, I never had to reattach FP.Just to add more or a reference. Livnitup did his Friday maybe 5 Cali time. He jsu tnow at 9Pm Dallas time texted me letting me know his Alexa showed up. He did NOT do a master reset.
So patience is going to be the route here.
so those 5 master resets weren’t needed ??Just to add more or a reference. Livnitup did his Friday maybe 5 Cali time. He jsu tnow at 9Pm Dallas time texted me letting me know his Alexa showed up. He did NOT do a master reset.
So patience is going to be the route here.
Sometimes true I have always advised against a master reset.A Sync master reset probably does more harm than good. It erased my trailer setup, for example. Don't do it for this update - you don't need to. Just be patient.
@TJSparky, @Livnitup, @Jesse-InfotainmentJesse - This is why my country code was wrong. I changed this setting as it was to allow NAV in motion but that is also the country code string from what I've gathered. US is 5553
APIM: 7D0-03-01 -> 5753 - xxx - xx-- (change only the bolded numbers only for NAV in motion, leave the "x" alone).
Here was the original thread where its mentioned in case anyone else comes across this.
https://www.f150gen14.com/forum/thr...een-while-in-motion-disabled-by-default.9418/
Allows the temps to be displayed on the screen and the dials if you have a 21.Can anyone explain what this change does? I did it but don't see any difference.
HVAC Interior Temps in Upper Corners
7D0-02-02
Orignal was 0684 XXXX XXXX
Changed to 4694 XXXX XXXX
Tha has no relation to unreal its like that in 22228@Jesse-Infotainment
On the update to Unreal I notice the font from the sync info screen is smaller. Is this normal?
I also got a map update during this, don’t know if that was part of the update.
![]()
![]()