Request VIN Lookup Thread

[Lawrence52]

You can view OTA history in your online profile on ford's site. You need a full set of updates run. You have the ACJ on the IPMA which was BC 1.4 via FDRS

Looks like your last run of updates was 14mo ago that started with some APIM/TCU PMI? A bit odd, but everything appears to have been updated then.

Jan 23 it looks like they successfully PMI'd the APIM but the IPMA and SCCM gave failure to communicate w/ APIM codes even after clearing the codes.

Thank you for running this HammaMan. If I were to get the cable/USB/battery maintainer, would these all be updates I should be able to make with FDRS? Is there anything else I need to consider before I move forward with trying to do this myself?

Sponsored

 

[HammaMan]

Thank you for running this HammaMan. If I were to get the cable/USB/battery maintainer, would these all be updates I should be able to make with FDRS? Is there anything else I need to consider before I move forward with trying to do this myself?

Nope. The PB can use the 15a harbor freight battery charger for its updates. Just make sure HVAC and headlights are turned off. I've also run 2 5.0 trucks off of the same 15a charger for over 90m charging the batts during forscan/FDRS updates.

Get on rugedraw's rental list if you need a cable.

 

[ScarabEpic22]

Hi all, just had some warranty work done at the dealer and asked them to update everything on my truck. Not sure if it was done or partially done, could someone take a look at my VIN? VIN: [edit: removed]

Also really interested in getting BC 1.4 enabled, been using BC 1.0 for 2 years and the ping-ponging has been a constant frustration.

 

[rugedraw]

Hi all, just had some warranty work done at the dealer and asked them to update everything on my truck. Not sure if it was done or partially done, could someone take a look at my VIN? VIN:

Also really interested in getting BC 1.4 enabled, been using BC 1.0 for 2 years and the ping-ponging has been a constant frustration.

Your truck is 100% up to date. As far as the FORScan changes needed to enable the BC 1.4 features, that has not been made public yet. Message me and I will provide them to you.

 

[ScarabEpic22]

Your truck is 100% up to date. As far as the FORScan changes needed to enable the BC 1.4 features, that has not been made public yet. Message me and I will provide them to you.

Thanks for checking and great to hear it was fully updated! I'll PM you now.

 

[TKarrh]

2021 F-150 Lariat - pretty sure I’ve never received and update and haven’t found a solution yet. VIN: 1FTFW1E88MFB08978

Appreciate any help.

 

[rugedraw]

2021 F-150 Lariat - pretty sure I’ve never received and update and haven’t found a solution yet. VIN:

Appreciate any help.

Yea, your truck has never gotten and update and never will unless a very tedious process is performed. Click the link in my signature regarding 2021 trucks that do not update for a detailed explanation on your issue.

 

[Mjp8540]

Would someone check my VIN for updates please? . Thanks

 

[rugedraw]

Would someone check my VIN for updates please? Thanks

Gladly, but please remove your VIN from the request.

Truck is on the latest Sync version, but it shows many of the ancillary modules with pending updates. List is below.

 

[Mjp8540]

Gladly, but please remove your VIN from the request.

Truck is on the latest Sync version, but it shows many of the ancillary modules with pending updates. List is below.

thank you. Do you think these will come through automatically now that I’m on a battery tender?

 

[khaledo90]

Can someone check my VIN for updates please?

Thanks

 

[rugedraw]

Can someone check my VIN for updates please?

Thanks

Gladly but please remove the VIN from your post. Not much pending in your case.

 

[tim1077]

Please check my VIN for updates?

 

[b_dub23]

Gladly, but please remove the VIN from your post.

Truck is on the latest Sync version and pending updates are below. The OTA for BC 1.4 was sent to it a week ago but failed due to a server issue. This has been happening to many people lately. It will be resent eventually.

Thanks for looking this up! Which of these module updates are required for BC 1.4? Have the Mongoose now and FDRS software just haven't bought a license and started yet. Never seen and OTA attempt since you initially posted this for me but many they have not tried to send again yet.

 

[svtzx2]

Thanks for looking this up! Which of these module updates are required for BC 1.4? Have the Mongoose now and FDRS software just haven't bought a license and started yet. Never seen and OTA attempt since you initially posted this for me but many they have not tried to send again yet.

The IPMA/PSCM combo is what upgrades the BlueCruise. CMR too, but you don’t have an update showing.

Sponsored