Request VIN Lookup Thread

[rugedraw]

Is this going to be an issue or will the procedure correct itself? I followed all directions & procedures when updating my truck with FDRS.

It will correct itself. I've been told by people that know a lot more about this stuff than I do that the servers for FDRS and the OTA process are not directly linked. Your truck is fine and you have nothing to worry about as far as this goes.

Sponsored

 

[Abraham5G]

Could someone please look up and show me what shows up for my vin 1FTFW1E88PFC11614 ?
My outer left rear corner and sometimes outer left front corner parking sensors don't work properly when it's 96°F or hotter outside. Dealer already replaced parking sensors and ipma module. I have no alerts in the Fordpass app.

 

[rugedraw]

Could someone please look up and show me what shows up for my vin 1FTFW1E88PFC11614 ?
My outer left rear corner and sometimes outer left front corner parking sensors don't work properly when it's 96°F or hotter outside. Dealer already replaced parking sensors and ipma module. I have no alerts in the Fordpass app.

Your truck is not reporting any codes that are relevant to your issue. I see the tech notes and I see they had to replace the IPMA twice and the seem to have programmed it correctly and calibrated it after they programmed it. I am not sure what is causing the issue.

 

[Abraham5G]

Your truck is not reporting any codes that are relevant to your issue. I see the tech notes and I see they had to replace the IPMA twice and the seem to have programmed it correctly and calibrated it after they programmed it. I am not sure what is causing the issue.

Thanks for checking!

 

[Hans Moleman]

Please can you check my VIN?

1FTFW1ED7PFB38992

After receiving the GWM update 24-PU0227-VI-RBS my truck has stopped receiving updates for almost 2 months.

 

[rugedraw]

Please can you check my VIN?

1FTFW1ED7PFB38992

After receiving the GWM update 24-PU0227-VI-RBS my truck has stopped receiving updates for almost 2 months.

Nothing to worry about. Your truck is already on the latest Sync version and of the updates you show pending below, the IPMA and PSCM are not available OTA so you do not have anything major pending via OTA's.

 

[dgndgb]

Got some time to kill and was thinking about having an FDRS session. Would someone mind letting me know what updates are available for 1FTFW1ED5NFC17283?

Thank you!

 

[Hans Moleman]

Nothing to worry about. Your truck is already on the latest Sync version and of the updates you show pending below, the IPMA and PSCM are not available OTA so you do not have anything major pending via OTA's.

thanks I appreciate you for checking!

 

[rugedraw]

Got some time to kill and was thinking about having an FDRS session. Would someone mind letting me know what updates are available for 1FTFW1ED5NFC17283?

Thank you!

You're only showing updates for the door modules and PCM. I'd save the $50 for another time.

 

[dgndgb]

You're only showing updates for the door modules and PCM. I'd save the $50 for another time.

Thank you as always kind sir!

 

[mrrobertkent]

@rugedraw Would you mind checking my VIN as well? I currently have FDRS until 06/10 and have gone through all updates except for the door modules. So far it’s only shown one update per module, no additional ones have come up after updating related modules like other users have suggested. And I’m not sure if Bluecruise 1.3 was supposed to be in one of the updates but lane changing w/ bluecruise did not work.

VIN: 1FTFW1E85NFB16926

 

[fordtruckman2003]

@rugedraw Would you mind checking my VIN as well? I currently have FDRS until 06/10 and have gone through all updates except for the door modules. So far it’s only shown one update per module, no additional ones have come up after updating related modules like other users have suggested. And I’m not sure if Bluecruise 1.3 was supposed to be in one of the updates but lane changing w/ bluecruise did not work.

VIN: 1FTFW1E85NFB16926

If you installed all the updates then portions of BC 1.4 was included in those. The APIM update to turn it on is not released yet. You should have better lane centering now.

I would update the door modules if you already have FDRS just to get it out of the way. Easier than waiting for the OTA.

 

[sh0rtyii]

I am looking at running FDRS to update my modules to get the split screen veiw on a 2021 xlt w/360 cam, but was waiting. Ford has been sending out OTA and I recieved 4.3.3 and then 4.3.6. PU 4.3.4 was for the IMPA but I haven't recieved it yet and wasn't sure if I would since I have cams at speed, one of the features for 4.3.4.
My VIN is 1FTFW1E84MFC80697. Could someone check FDRS for my vehicle updates?

 

[Taylorj7x]

Hello, I would appreciate a VIN lookup as my trucks warranty expires in 3 days. I bought a used 2021 Job 1 in February. Long story short the SYNC 4 was not updated for 2.5 years because the modem wasn’t connected correctly and I had the Ford dealer fix it under warranty. Im still on a 2022 Sync 4 update as they have slowly been rolling in. The bed lights also dont work because of some software issue and I have posted a picture. Just want to know if FRDS shows anything else that might be wrong so I can report it before the warranty expires on June 12th. VIN 1FTFW1E59MFB59766

 

[pjstud1v]

Can someone please check 1FTFW1ED6NFB38947 for FDRS updates?

I’m getting a Mongoose and want to use the $50 FDRS access for a few days if there are updates I should get. I seem to have an OTA update that’s stuck because I get a notification that it will install overnight but when I try to see the details, it just shows me the info for the last successful one.

Sponsored