Part number for black McGard installation kit?

[runner61627]

Looking for a part number for McGard black installation kit (lug nuts and locks) for 2025 Ford F150.

Sponsored

 

[Dakar09]

I used McGuard #64074 black lug nuts and #24216 black locks.

Be advised, the factory lug wrench will NOT fit these.

 

[runner61627]

I used McGuard #64074 black lug nuts and #24216 black locks.

Be advised, the factory lug wrench will NOT fit these.

Thank you very much!

 

[VRFlyer]

Just go with one and done wheel tuner lock kit from Gorilla.

Linky Link: Gorilla Automotive 76644NBC

 

[Dakar09]

I've used Gorilla tuner lugs on most of my previous cars, and they really don't hold up well to the winter conditions up in my area. That's why I went McGuard this time. Hoping for a better result.

 

[VRFlyer]

I've used Gorilla tuner lugs on most of my previous cars, and they really don't hold up well to the winter conditions up in my area. That's why I went McGuard this time. Hoping for a better result.

I've never had a problem running them during salty winter mess (past 8 yrs up), however, I tend to rinse my cars off weekly. YMMV!

 

[Dakar09]

I definitely didn't rinse them weekly, but I did wash the lugs twice a year when I did my tire rotations. It was virtually impossible to wash them on the cars because the rims were so tight around the tuner lugs (which is why I needed tuner lugs in the first place )

I have no real-world evidence on the McGuards yet, tbh.

 

[Je1279]

I can only speak to the McGards, but if they get a bit of surface rust over time, leave them in a container with some Evaporust overnight and they will look good as new when they come out.

Sponsored