Sponsored

Intelligent Cruis sign recognition not working message

Fredm2002

Well-known member
First Name
Fred
Joined
Mar 21, 2020
Threads
9
Messages
329
Reaction score
261
Location
Iowa
Vehicles
21 Platinum Antimatter Blue; 2018 Edge 1984 V-65
Occupation
Education
I have gotten the same error message. Talked to Ford Engineer and I am taking the truck to a dealer over Christmas Break for some diagnostics. Also, be careful ... intelligent cruise control seems to like to read weight signs and adjust your speed. For example, approaching a bridge that says there is a 35-ton limit, the intelligent cruise control will slow my truck from an interstate speed of 75 to 35. This tends to cause near collisions with semi-trucks and other cars that don't expect you to slow down. Also, scares the heck out of me.

This is being looked at as well.
Sponsored

 

texag

Well-known member
Joined
Mar 22, 2021
Threads
14
Messages
163
Reaction score
145
Location
CA
Vehicles
2010 Silverado
Mine started doing this ~ week ago, almost seemed to coincide with the OTA updates that got pushed out recently.
 

texag

Well-known member
Joined
Mar 22, 2021
Threads
14
Messages
163
Reaction score
145
Location
CA
Vehicles
2010 Silverado
Also still can’t figure out why my wireless CarPlay drops out in the exact same spot in town without fail. Dealer is pretty much dumbfounded.
 

FordConvert

Well-known member
First Name
Craig
Joined
Aug 11, 2021
Threads
6
Messages
141
Reaction score
179
Location
Utah
Vehicles
2021 F-150 Lariat PB 502A
Occupation
Builder
Also still can’t figure out why my wireless CarPlay drops out in the exact same spot in town without fail. Dealer is pretty much dumbfounded.
I have the same issue. Really strange.
 

snyce1

Well-known member
First Name
Steve
Joined
Dec 6, 2021
Threads
13
Messages
260
Reaction score
87
Location
Schenectady,NY
Vehicles
21' F150PB PLATINUM, 17'Escape, 15'expeditionEL
Has anybody received this message when using Cruise Control? It's still picking up the speed limit signs but not adjusting the speed as it should. Does anybody know which camera picks up the speed limit signs?

VideoCapture_20211203-083031.jpg


20211203_082313.jpg
Ive had same but more often adaptive not available. Sometimes restart helps . I have several computer errors . Sadly i think my truck has software problems for several systems and may be destined for lemon like behavior. Ford says update
 

Sponsored

Jus Cruisin

Well-known member
First Name
Tim
Joined
Feb 13, 2021
Threads
15
Messages
910
Reaction score
962
Location
Metro Detroit
Vehicles
2023 GMC Sierra Denali Ultimate 4X4 - 6.2l
Occupation
Very retired
I had it occur a week ago Saturday. I haven't used the cruise since but I received ota 2.1.1 since. Maybe that fixed it.
 

PungoteagueDave

Well-known member
First Name
Dave
Joined
Feb 20, 2021
Threads
6
Messages
593
Reaction score
440
Location
33435
Vehicles
Tesla MX, Porsche C4S, Ford F-350 KR, Ford F-150 K
Occupation
retired
Same issue here. Thought it might be obscured camera because that is often the problem with similar messages in my Tesla. But apparently it is software per above. We're driving buggy iphones folks.
 

sonofzell

Well-known member
First Name
Kirk
Joined
Mar 4, 2021
Threads
7
Messages
186
Reaction score
198
Location
Philadelphia, PA
Vehicles
'21 F150 XLT Sport 2.7EB SCrew 302A High
Also still can’t figure out why my wireless CarPlay drops out in the exact same spot in town without fail. Dealer is pretty much dumbfounded.
This is odd - I was literally having this conversation with my son this weekend! There is an intersection near my home at which this happens EVERY. SINGLE. TIME. In all honesty, I don't suspect it to be an issue with the truck per se (or even carplay specifically vs. just cellular interference since I'm always streaming audio), but I'm also at a loss as to what could be the cause.

There are apartment complexes on 3 of the four corners of the intersection, and a small dentist office on the fourth. Nothing else at all that would indicate any source of interference.:unsure:
 

texag

Well-known member
Joined
Mar 22, 2021
Threads
14
Messages
163
Reaction score
145
Location
CA
Vehicles
2010 Silverado
This is odd - I was literally having this conversation with my son this weekend! There is an intersection near my home at which this happens EVERY. SINGLE. TIME. In all honesty, I don't suspect it to be an issue with the truck per se (or even carplay specifically vs. just cellular interference since I'm always streaming audio), but I'm also at a loss as to what could be the cause.

There are apartment complexes on 3 of the four corners of the intersection, and a small dentist office on the fourth. Nothing else at all that would indicate any source of interference.:unsure:
What’s truly bizarre to me is that nothing else is affected, cell service, streaming audio, gps, etc. The CarPlay simply fails and disconnects.
 

Safetyrep

Active member
First Name
Marty
Joined
Mar 19, 2021
Threads
4
Messages
33
Reaction score
13
Location
Saraland, Al
Vehicles
2021 F150 Lariat
Occupation
Retired
Just got home from the dealer where they preformed TSB 21-2249 and camera alignment, suppose to be the fix, so far so good.
 

Sponsored


CnB150Lariat

Well-known member
Joined
Jan 9, 2021
Threads
4
Messages
172
Reaction score
182
Location
??
Vehicles
2021 F150 Lariat, PB, Fx4, SuperCrew w/5.5 Bed
Happened to me… cleaned the windshield and didn’t happen since. Try cleaning with wipers or quick swipe of the glass outside where the camera is next to rear view? Or maybe I just got lucky?
 

jafo

Well-known member
Joined
Dec 6, 2020
Threads
4
Messages
98
Reaction score
29
Location
Pittsboro
Vehicles
2021 F-150 Lariat Star white
Also still can’t figure out why my wireless CarPlay drops out in the exact same spot in town without fail. Dealer is pretty much dumbfounded.
Android auto drops out at the same spot every day I drop my kids off at school There is a water tower with a bunch of antennas on it. Some inference because of it.
 

Addabob64

Well-known member
Joined
Dec 19, 2021
Threads
3
Messages
125
Reaction score
130
Location
NTX - NNE of Dallas Area
Vehicles
2021 F150 PB 900A
I started having this issue about a week ago. I got OTA 1.6 back in late Sept or early Oct and everything for the intelligent cruise and sign recognition was turned on and operating properly for 3 months.

Yesterday I finally got got the 1.7.1 update after leaving the truck on so it could download. Auto update when it was turned off didn’t seem to be working. After about 30 minutes and 3GB of data download, it all seemed to stop, so I shut it off and went inside.

About 30 minutes later got the Ford Pass message that 1.7.1 had been applied. Took it out to see if speed sign recognition was working and it wasn’t. checked the menus to make sure settings hadn’t changed and found Speed Sign Recognition grayed out. I tried changing the cruise mode to normal and SSR became available which wasn’t right As I think it requires Intelligent Cruise to work. When I selected SSR, it took me to the Speed Warning menu, so was now linked to the wrong menu item. Switched to Adaptive Cruise and it did the same thing, back to SSR and it grayed out again…. So something in 1.7.1 is messed up it seems…. Not sure if I’ll get 2.1.1 anytime soon to see if it fixes this issue. Hopefully it will come soon as the dealer is way backed up to look at this to see if there is anything else going on.

I also noticed that the latest updates wiped out all of my saved navigation points and radio presets. That isn’t a big deal and kind of expected since Sync was also updated.
 

Safetyrep

Active member
First Name
Marty
Joined
Mar 19, 2021
Threads
4
Messages
33
Reaction score
13
Location
Saraland, Al
Vehicles
2021 F150 Lariat
Occupation
Retired
Just got home from the dealer where they preformed TSB 21-2249 and camera alignment, suppose to be the fix, so far so good.
Well that TSB wasn’t the fix I had hoped, still doing the same.
Come on FORD help us out!
 

Addabob64

Well-known member
Joined
Dec 19, 2021
Threads
3
Messages
125
Reaction score
130
Location
NTX - NNE of Dallas Area
Vehicles
2021 F150 PB 900A
What PowerUP OTA version is everyone running that are having this SSR issue? I was at 1.6 with no issue since late September, and now after the 1.7.1 upgrade over the weekend, SSR is grayed out... I'm just curious to see if it has any correlation to the 1.7.1 update which seems to have various potential problems based on this site and other forum site posts.
Sponsored

 
 







Top