FM/AM frequencies to show/search by 0.1 decimal not 0.2

[Biorante]

Hello,
is there a way to change how the FM/AM frequencies are searched in Sync4?

FM Band Structure:
- The FM radio band in the United States runs from 88.0 MHz to 108.0 MHz.
- FM stations are assigned frequencies in 0.2 MHz increments, starting at 88.1 MHz. The odd-numbered decimal frequencies (e.g., 88.1, 88.3, 88.5, etc.) are used to ensure that there is sufficient spacing between stations to reduce interference.

I would like to be able to search stations like 88.2, 88.4, etc.

Sponsored

 

[v8440]

Why? They won't exist, at least in the US.

 

[Biorante]

Why? They won't exist, at least in the US.

Yea, but it's different in Poland and other countries in Europe. And lot of FM stations have noise due to that

 

[v8440]

Are you in the US? If so, I'd be extremely surprised if any ststions from that far away had an effect on reception here, and if they did, tuning to the off frequencies would make reception worse, not better. Now if you want to use the truck in one of the countries that uses even decimal frequencies then what you're wanting would work. Or maybe it can be set to receive odd or even but not both, I don't know.

 

[v8440]

Maybe forscan can make the change?

 

[Sig Oris]

Hello,
is there a way to change how the FM/AM frequencies are searched in Sync4?



I would like to be able to search stations like 88.2, 88.4, etc.

Is your bear named WOJTEK ?

 

[roadPilot]

Are you in the US?

His profile and his post (#3) say no.

 

[TarnishedCopper]

Hello,
is there a way to change how the FM/AM frequencies are searched in Sync4?



I would like to be able to search stations like 88.2, 88.4, etc.

You could ask Ford if they still monitored this group.......

 

[roadPilot]

You could ask Ford if they still monitored this group.......

They would ignore him as they have ignored most everybody else.

 

[Sig Oris]

They would ignore him as they have ignored most everybody else.

I heard they were waiting for an OTA to their computer that gives them the capably to REPLY

 

[TarnishedCopper]

It is sad when a company the size of Ford who has the ability to receive information from their end-users (this forum) and turns their back on them. I'm just wondering if their got their "panties in a wad" over something that was said here. Like politicians, they don't want to be reminded of their dismal failures, only their accolades whether deserved or not. I for one want the Axle bolt issue corrected permanently and properly, not "only if it breaks."

 

[Buyer2021]

Yea, but it's different in Poland and other countries in Europe. And lot of FM stations have noise due to that

Tagging @SilverPigeon in Australia (with an imported and converted USA F150) where I believe they follow the European radio standard - perhaps he can help the OP in Poland?

 

[Biorante]

I found some instructions for ACM to change via Forscan. Will check it tmrw.

 

[SilverPigeon]

Tagging @SilverPigeon in Australia (with an imported and converted USA F150) where I believe they follow the European radio standard - perhaps he can help the OP in Poland?

I've never used the Am/Fm radio so I've never looked ?

I found some instructions for ACM to change via Forscan. Will check it tmrw.

If you have no luck, let us know and I'll do a deep dive. ?

 

[Buyer2021]

I've never used the Am/Fm radio so I've never looked ?

Same here!

Sponsored