F-150 Custom Center Console Storage - 3D Printed

[tawfiqi]

I have designed a 3D printed version of the mobile pocket/holder that comes from factory in the center console. It can be customized based on your need. I have customized it to hold my electronic cigarette, zippo lighter, keys and more.

After few tests, I managed to have one that is steady, and more useful than the original one.

The size can vary based on the need, it can be longer on the left side, and front.

Let me know if anyone is interested to print his, so I can send him the open file.

-

If anyone has more ideas that can be implemented to be 3D printed, let me know and I'll try my best to design and print them.

Sponsored

 

[2022Bruce_L]

Very nice. I was wondering about 3D printing a quick release cover solution for the cubby area above the glovebox for those of us with XLs. As well as a solution for the jump seat shoulder belt delete for those in RCSB running a center console. Most are just running the OE plastic and to me it looks junky in my truck.

 

[Jmeo]

I would love a tray that I can put my keys on that sits as high as possible to not interfere with the wireless charging pad. I tried one from Etsy, but the seller can't seem to figure out the tabs correctly and it droops super low and touches the phone charging pad.

You can see that the tabs are WAY too small and the whole tray sits too low. It could be a little smaller if need be, but this is the idea I am after.

The rear of this tray is resting on top of the charging pad in the following photo

Note: Don't mind the open container in the photos, you saw nothing.....

 

[euphoric28]

would love a magic box 2.0 mount where I can still close the door!

 

[RociPB]

I have designed a 3D printed version of the mobile pocket/holder that comes from factory in the center console. It can be customized based on your need. I have customized it to hold my electronic cigarette, zippo lighter, keys and more.

After few tests, I managed to have one that is steady, and more useful than the original one.

The size can vary based on the need, it can be longer on the left side, and front.

Let me know if anyone is interested to print his, so I can send him the open file.

-

If anyone has more ideas that can be implemented to be 3D printed, let me know and I'll try my best to design and print them.

I’m very interested, especially if you could make one for the passive entry key fob, I can use the machine at work but I just don’t know how to use solid works etc whatever it takes to make the files. Thanks in advance, that’s awesome work

 

[tawfiqi]

Very nice. I was wondering about 3D printing a quick release cover solution for the cubby area above the glovebox for those of us with XLs. As well as a solution for the jump seat shoulder belt delete for those in RCSB running a center console. Most are just running the OE plastic and to me it looks junky in my truck.

Could you provide me a picture of the area you mean? Do you mean the storage box above the glovebox?

The Jump Seat Shoulder might be hard to do as its more complicated.

 

[tawfiqi]

would love a magic box 2.0 mount where I can still close the door!

Unfortunately, I didn't find the sizes of the magic box dimensions. Most probably it will be too large to allow the door to close.

I recommend Sticky Hook and Loop Tape on the back, will help it stay at place and allow you to remove it at anytime.

 

[tawfiqi]

I would love a tray that I can put my keys on that sits as high as possible to not interfere with the wireless charging pad. I tried one from Etsy, but the seller can't seem to figure out the tabs correctly and it droops super low and touches the phone charging pad.

You can see that the tabs are WAY too small and the whole tray sits too low. It could be a little smaller if need be, but this is the idea I am after.

The rear of this tray is resting on top of the charging pad in the following photo

Note: Don't mind the open container in the photos, you saw nothing.....

We should be able to do that by allowing the tabs to be longer where the tray would stay the top

 

[tawfiqi]

I’m very interested, especially if you could make one for the passive entry key fob, I can use the machine at work but I just don’t know how to use solid works etc whatever it takes to make the files. Thanks in advance, that’s awesome work

I was actually was just going to design one where i can have the key stored in addition to what i have! I will make one where you can store the key and some extra box for storage, keys, etc.

 

[2022Bruce_L]

Could you provide me a picture of the area you mean? Do you mean the storage box above the glovebox?

The Jump Seat Shoulder might be hard to do as its more complicated.

 

[2022Bruce_L]

I would love a tray that I can put my keys on that sits as high as possible to not interfere with the wireless charging pad. I tried one from Etsy, but the seller can't seem to figure out the tabs correctly and it droops super low and touches the phone charging pad.

You can see that the tabs are WAY too small and the whole tray sits too low. It could be a little smaller if need be, but this is the idea I am after.

The rear of this tray is resting on top of the charging pad in the following photo

Note: Don't mind the open container in the photos, you saw nothing.....

https://www.etsy.com/listing/148314...ZEMwPPB1sXZikj6odojp2em4xv0AR2_tjM8LDjVUBhgHs

 

[Jmeo]

https://www.etsy.com/listing/148314...ZEMwPPB1sXZikj6odojp2em4xv0AR2_tjM8LDjVUBhgHs

This is the one that I have. The seller has been working with me to correct the issues I am having and he has been very helpful. Seems to me the tabs have changed for the 2023 model and that seems to be the problem.

That said, I am happy to buy one that fits correctly if that happens before/if a revision is made for the Etsy one.

 

[tawfiqi]

This is the one that I have. The seller has been working with me to correct the issues I am having and he has been very helpful. Seems to me the tabs have changed for the 2023 model and that seems to be the problem.

That said, I am happy to buy one that fits correctly if that happens before/if a revision is made for the Etsy one.

I am not sure where the difference between the 2023 and and 2021/22, I couldn't find any info. If you are wondering why the tabs goes all the way down, it is suppose to do from factory, just like the ones came with the vehicle.

 

[tawfiqi]

To be honest this will be about impossible mission for me, as I got a lariat, which means I got the upper box already, so which will have different dimensions than yours, and mine doesn't come with different seatbelt method.

 

[Jmeo]

I am not sure where the difference between the 2023 and and 2021/22, I couldn't find any info. If you are wondering why the tabs goes all the way down, it is suppose to do from factory, just like the ones came with the vehicle.

Me either, nor can I validate the assumption, I was just lead to believe this based upon what the Etsy seller told me as to why or why not the tray he made does not fit appropriately in my 23. I do know they changed the front storage area somewhere along the G3 production to no longer have media bin ambient light and the wireless charger is completely different than my previous 2022 F150.

Sponsored