Los150
Well-known member
Were you logged in still from yesterday or did you log in fresh today? The Network diagnostic shows the login server FAIL. Everything else has been working.
Sponsored
Sponsored
imnuts
Well-known member
- First Name
- Mark
- Joined
- Mar 1, 2021
- Threads
- 26
- Messages
- 1,580
- Reaction score
- 1,675
- Location
- Dirty Jerz
- Vehicles
- '21 502A Powerboost 4×4
- Occupation
- Facilities Engineer
I logged in earlier this evening. Took a while to authenticate, but I got in.
Snakebitten
Well-known member
- First Name
- Bruce
- Joined
- Jun 19, 2021
- Threads
- 5
- Messages
- 11,560
- Reaction score
- 22,964
- Location
- Coastal Texas
- Vehicles
- 2022 F150 KingRanch Powerboost
Close everything.
Even reboot.
Then login to Ford.com with a browser first. Once it succeeds, leave it open and attempt to login to FDRS with the same credentials as your Ford.com account.
Los150
Well-known member
I tried all of that and it still failed repeatedly. I was already logged in.
It finally took for me to completely uninstall the stupid software, reboot then install it again. FInally let me in. Ridiculous.
Sponsored
aemploye
Well-known member
- First Name
- Sam
- Joined
- Dec 6, 2024
- Threads
- 10
- Messages
- 55
- Reaction score
- 15
- Location
- Phoenix AZ
- Vehicles
- 2021 F150
Just checking in, I haven't updated my firmware in fear of loosing Lane Centering for my powerboost?
Can anyone confirm if its ok to update to the latest version?
Can anyone confirm if its ok to update to the latest version?
Phil823
Active member
I think lane centering on PB has been solved. You MUST wear your seatbelt now. I just 100% updated yesterday and verified the seatbelt thing in my non PB also.
Ajzride
Well-known member
No, regardless of whether you get the seatbelt warning, lane centering will not work if the seatbelt is not latched.
Sponsored
Ajzride
Well-known member
Correct, in the latest IPMA it got added.
Probably in response to that idiot who made a video of his F450 driving down the interstate at 80mph with lane centering engaged and a weight on the wheel while he was lying down in the back seat
aemploye
Well-known member
- First Name
- Sam
- Joined
- Dec 6, 2024
- Threads
- 10
- Messages
- 55
- Reaction score
- 15
- Location
- Phoenix AZ
- Vehicles
- 2021 F150
So just to confirm CL is working on the latest update for the PB models & won't deliver an error when trying to turn it on but requires a seatbelt to be clicked in to work?
imnuts
Well-known member
- First Name
- Mark
- Joined
- Mar 1, 2021
- Threads
- 26
- Messages
- 1,580
- Reaction score
- 1,675
- Location
- Dirty Jerz
- Vehicles
- '21 502A Powerboost 4×4
- Occupation
- Facilities Engineer
Not sure why you'd be driving down the highway without a seatbelt anyway, unless you want to play Superman in an accident.
aemploye
Well-known member
- First Name
- Sam
- Joined
- Dec 6, 2024
- Threads
- 10
- Messages
- 55
- Reaction score
- 15
- Location
- Phoenix AZ
- Vehicles
- 2021 F150
I mean sometimes i drive somewhere and dont think about it ?
Spiffy
Well-known member
I was playing around with forscan long time ago. One thing I messed with was turning off drivers seatbelt chime. I never reset it. I dont get seatbelt nag.
I use the comma auto pilot. When engaging it won't go into operation without the seatbelt and it states that. I don't remember if I use bluecruse or even just normal cruse only if there is a message to use seatbelt.
I'm working through a problem right now and I think this this new requirement is a factor.
I use the comma auto pilot. When engaging it won't go into operation without the seatbelt and it states that. I don't remember if I use bluecruse or even just normal cruse only if there is a message to use seatbelt.
I'm working through a problem right now and I think this this new requirement is a factor.
Sponsored
