ECU module programming guide using FDRS

[Kanuck]

Thank you both, I saw that post as well and usb currently in progress for gwm

BOTH? I know I am oversized but.....ROTFLMAO

Sponsored

 

[rockfish]

Can't thank @Jesse-Infotainment & @rugedraw enough. They got me rolled back and BC 1.4 is working flawlessly now. All you guys have been super helpful. Pretty cool community we got here.

DPRC will legislate their way to prosperity
or go bankrupt after running out of other people's money

On your way out of town you'll get to see one of the greatest sites to behold....

Not that Nevada is particularly special, it's just not the DPRC

This forum is so good and useful overall, but I wish everyone would stick to keeping it about our trucks and not push political ideologies, rants about society etc.

 

[Wangchung83]

BOTH? I know I am oversized but.....ROTFLMAO

Lol

 

[Wangchung83]

After downloading one update on the usb , when I install back in computer should I delete the files on the usb?

 

[m_bt54]

After downloading one update on the usb , when I install back in computer should I delete the files on the usb?

Yes

 

[Wangchung83]

Yes

Awesome, just want to be safe?

 

[Kanuck]

After downloading one update on the usb , when I install back in computer should I delete the files on the usb?

If the update installed correctly. Best to do a quick format of the USB stick.

 

[m_bt54]

If the update installed correctly. Best to do a quick format of the USB stick.

Was going to suggest the same but I personally don’t do that myself so didn’t want to be a hypocrite

 

[Kanuck]

I do it just incase, for some unknown reason, Windows leaves something on the stick or in the fat table. I find it quicker that doing a file delete.....lol

 

[JEB]

This forum is so good and useful overall, but I wish everyone would stick to keeping it about our trucks and not push political ideologies, rants about society etc.

Wait, what? You mean a strong technical knowledge about trucks doesn’t give you perfect insight into the inner workings of the human condition? Who knew?

 

[Wangchung83]

Y’all guys are awesome, well after gwm update the sync screen is now doing something funny with xm radio stating searching for signal, never have seen that before:/. Also just noticed phone not connecting either. Went to make sure no codes, network scan ok, all green in Fdrs. Moved on to APIM and have USB in for that one right now. Does this sound normal or should I just stop after the usb complete for APIM?

 

[rugedraw]

Y’all guys are awesome, well after gwm update the sync screen is now doing something funny with xm radio stating searching for signal, never have seen that before:/. Also just noticed phone not connecting either. Went to make sure no codes, network scan ok, all green in Fdrs. Moved on to APIM and have USB in for that one right now. Does this sound normal or should I just stop after the usb complete for APIM?

Click the GWM on the toolbox tab to bring up the guided routines you can do for that module. Find the GWM configuration tool and run that. If the issue persists, move on to the APIM.

 

[Wangchung83]

Click the GWM on the toolbox tab to bring up the guided routines you can do for that module. Find the GWM configuration tool and run that. If the issue persists, move on to the APIM.

Thanks I’ll do that once the APIM download completes that in the usb right now.

 

[Wangchung83]

Don’t have gwm tool under guided routines:/. Here’s what I have after APIM update.

Click the GWM on the toolbox tab to bring up the guided routines you can do for that module. Find the GWM configuration tool and run that. If the issue persists, move on to the APIM.

Note this after APIM update through usb
Also have data warning under pscm

 

[JEB]

Thanks I’ll do that once the APIM download completes that in the usb right now.

You’ll probably end up running a configuration routine, but I’d start with something less dramatic first, since you aren’t showing any DTCs. Finish with the APIM update in progress. Then do self-tests on both the APIM and GWM and see if your issues resolve before proceeding with a reconfiguration.

Sponsored