ECU module programming guide using FDRS

[JIMFOUNTAIN]

It seems to reset to default if you power off.

Update: As of right now pressing my camera button while driving... pulls up the same view as the last time I did that.... It doesn't reset to the tailgate view like I remembered. And like I think it used to....

Sponsored

 

[Cabrinha]

This happened after the IPMA update With the FDRS tool , Any idea of what What can I do to fix this ?

 

[Snakebitten]

Do you have DTCs for any modules?
And sometimes after an update you will get alerts like that for a few key cycles.

 

[Big Dog Daddy]

All as @Snakebitten said, then in fdrs clear DTC's and rescan the truck. Then road test again.

 

[Ajzride]

This happened after the IPMA update With the FDRS tool , Any idea of what What can I do to fix this ?

I got that about 37 times tonight... but we won't talk about what I was doing. It's not hard to get that is the point, and not hard to clear it either.

 

[Cabrinha]

Do you have DTCs for any modules?
And sometimes after an update you will get alerts like that for a few key cycles.

That's what I see

 

[Ajzride]

That's what I see

"Clear and retest"

 

[rugedraw]

That's what I see

Did the IPMA update get hung up at the end, or it went through to the end where FDRS said it was successful?

 

[Cabrinha]

Did the IPMA update get hung up at the end, or it went through to the end where FDRS said it was successful?

The IPMA update hung up at the end , I tried twice and it was the same , now the IPMA is not on the list of SW Updates

 

[Cabrinha]

"Clear and retest"

I've done it a few times but they keep coming back.

 

[Ajzride]

I've done it a few times but they keep coming back.

unfortunate. It does say incompatible configuration. I wonder if a PMI would help. I see @rugedraw asked about it completing, it does appear it might have not finished the config.

 

[rugedraw]

unfortunate. It does say incompatible configuration. I wonder if a PMI would help. I see @rugedraw asked about it completing, it does appear it might have not finished the config.

If you try the PMI, make sure you select "no" when asked if it is the original module.

 

[ReverendQ]

Same thing happened to me. 12 volt warning. Some can get it to clear by driving it some. I tried and it would not clear so I rolled mine back. Then I installed the bCM update a few days later no issue.

I think Skier has a platinum? He would have to confirm. I lose track.

But the headlight issue is going to happen if its going to happen ford has released a memo about it being an incompatible software in the headlight modules.

@Jesse-Infotainment Why not do this for P160A?

 

[Jesse-Infotainment]

@Jesse-Infotainment Why not do this for P160A?

IM not sure I understand? Did I say not to do that or something?

 

[Kanuck]

I believe you get 3 calendar days regardless of when you start. So if you purchase at 12:01 AM tonight you would get all day Friday through Sunday night at 11:59 PM. I don't recall which time zone they use but I suspect it's ET...

If you buying early morning (Tuesday) you get all of Tuesday, all of Wednesday and all of Thursday. If you log in late Thursday night and stay logged in.....someone said you get an additional 8 hours.

Sponsored