ECU module programming guide using FDRS

[JoeBlowFord]

@JoeBlowFord

your bluecruise should work now

Tested and confirmed! After 30 years of hands on the wheel, it's a weird feeling that'll take some time to get used to.

The DSM has nothing to do witht he Gateway. its only function is to handle tilt wheel, Adjustable pedals, your seats movement and power boards if you have them. If all the heats steering wheel and heated adn cooled seats are working Id leave be for now. The issue is the As build has not been updated online. So the config is failing becuase it is looking for 40 lines and you now have 44.

Something went wrong in the update and it didnt update the database. It is not a big fdeal soon enough the Asbuild on liine will update on its own because the truck self reports every so often, Once that happens youll be able to do a PMI.

It is not important. It wont cause an issue.

You are good to go though. BC is all set.

Understood. I'll let this rest for a while. Still have ~4 weeks left on my FDRS license. Will try to check it again about a week before expiration. Heated steering, heated/cooled seats, massage, adjustable wheel and seats, running boards are all working, so makes sense to ignore.

Thanks again for the help!

Sponsored

 

[Jesse-Infotainment]

Tested and confirmed! After 30 years of hands on the wheel, it's a weird feeling that'll take some time to get used to.



Understood. I'll let this rest for a while. Still have ~4 weeks left on my FDRS license. Will try to check it again about a week before expiration. Heated steering, heated/cooled seats, massage, adjustable wheel and seats, running boards are all working, so makes sense to ignore.

Thanks again for the help!

No Problem. Check your as build on line. Whne you see the 744 address go to having more than 40 lines you can do the PMI

 

[JoeBlowFord]

Others have said it, but it bears repeating...

After going from 1.6.0 to fully up to date, the PowerBoost is a whole new truck. Electric drive kicks in quicker, more frequently and runs for longer. No more tricks with having to double brake to try and get the ICE to shut off. It now behaves exactly the way I expected it to from the start.

 

["Steve"]

^cant wait to get mine past 2.3

 

[remtiwk]

Here you go, have a bunch:

Big thanks to this entire thread and all the helpful people in it. Using this knowledge, I was able to get all of these updates installed. The tutorial at the beginning of this thread is very valuable and makes it easy. Thanks again!

My Sync version is now up to 22087 Revision 415. I haven't got a chance to plug back in again to see if more updates showed up now that I have those installed. My truck has 360 cameras but does not have blue cruise. As of this morning cameras at speed were still not working.

 

[wayfarer556]

Anyone know if the new vxnano firmware fixes the corruption glitch? Just trying to decide if it is worth paying for another 2 days of fdrs now or wait and get a mongoose?

As much as I would love the answer to this (I also have a nano), it feels like a very dangerous thing to test. In software terms, most of us have only 1 truck in production...there's no failover if something goes wrong.

 

[jordandev]

Big thanks to this entire thread and all the helpful people in it. Using this knowledge, I was able to get all of these updates installed. The tutorial at the beginning of this thread is very valuable and makes it easy. Thanks again!

My Sync version is now up to 22087 Revision 415. I haven't got a chance to plug back in again to see if more updates showed up now that I have those installed. My truck has 360 cameras but does not have blue cruise. As of this morning cameras at speed were still not working.

22087 is the latest for XLT 302As. Higher trims are at 22095.

 

[speedracercjr]

As much as I would love the answer to this (I also have a nano), it feels like a very dangerous thing to test. In software terms, most of us have only 1 truck in production...there's no failover if something goes wrong.

Dangerous, nah shouldn't be. Worse case you do a network scan, it gets corrupt and then run another scan with the mongoose to fix it.

 

[remtiwk]

22087 is the latest for XLT 302As. Higher trims are at 22095.

Ok. Thanks. Mine is a Lariat. Will the cameras at speed all of a sudden start working? Or will I need to make some forscan modifications?

 

[jordandev]

Dangerous, nah shouldn't be. Worse case you do a network scan, it gets corrupt and then run another scan with the mongoose to fix it.

And don't update the CCM

Ok. Thanks. Mine is a Lariat. Will the cameras at speed all of a sudden start working? Or will I need to make some forscan modifications?

I believe anyone who has gotten to 22095 would have cameras at speed without forscan.

I had the forscan changes in already before I updated to 22087 so I don't know myself.

 

[JFR0317]

Ok. Thanks. Mine is a Lariat. Will the cameras at speed all of a sudden start working? Or will I need to make some forscan modifications?

My truck is on 22095 after getting Power Up update 2.8.3 OTA, and I have rear view, bed view, and hitch view cameras at speed. I have never so far made any Forscan changes.

 

[Paul Neubauer]

Does doing these software updates yourself cause any warranty issues with Ford?

 

[jeffm4688]

I'm definitely still having an issue somewhere but I don't know where or how to fix it. I realize a couple posts above me show 22095 as latest but I am on 21281. I am still unsure as to if lane centering is supposed to be gone but I don't have any lane centering anymore when adaptive cruise is active and that is not normal.

Does me not having early access affect any of this?

With me being on 21281 am I potentially in some kind of weird limbo where this stuff doesn't work because my other modules are up to date & sync isn't?

Do the two updates which won't take (ABS/GSM) affect me from updating further?

I did start reading this thread from the beginning, and did notice a lot of people had an issue with the ABS/GSM, but haven't gotten to the solution yet so will keep poking along. I am out of FDRS this second and I don't know if it's worth paying for again just yet.

 

[Jesse-Infotainment]

What is your vin

 

[jeffm4688]

What is your vin

1FTFW1E85MFA30806

Sponsored