Mine reads 7D0-09-05 xxxx xxxx 20xx and it worksIf I want to auto slowdown in curves what would the setting be? That is, I have enabled as follows but it never seemed to slow down in curves and indeed 706-02-02 is xxxx-xxxx-00--.
What value is at 706-02-02 xxxx-xxxx-**--, or rather what do you have for the ** for a working PSA that slows in the curves?
Those are part of the changes required to enable the new BC, so I won't post that in the public forum.
As per the instructions in FDRS, if you saw nothing on your screen, tell FDRS "yes" when asked if it installed correctly. Then check to see if the GWM update went away from the list or not.
Got it. I thought it was something specific to PSA that I missed. I probably need to verify mine stopped working if it did stop. Hopefully OTA did muck it up without me realizing it. Good luck with the BC issue(s) and thanks for all you do.
OK guys I'm already getting frustrated ?. Got a license this morning, and seriously all day haven't been able to even get logged in to FDRS. I get a failure to reach Ford servers error every time. Ran the network test and got this. This laptop seriously got wiped this morning specifically so I could run FDRS, so there's no antivirus or anything installed. Am I just SOL? I bought a license that will go completely to waste because their servers are down? Or am I just an idiot and am missing something?
I've tried that with no luck. When I restarted and ran the network diagnostic everything passed, but then I tried entering my credentials, got a failure, and now the network diagnostic is failing again. I'm logged into both motorcraftservice.com and ford.com, and neither seems to have any effect on my ability to log in. If I try to log in as a non-dealer I still just get a login page, and if I enter my credentials the page reloads and nothing happens, it just keeps showing me the login page. Ugh this whole FDRS thing I think was a mistake, all this hassle and I won't even be able to update the modules I most need anyways. Crushing disappointment
@rugedraw your help is needed!
Thanks for the links. I downloaded version 41, and am having the same issue. It's really weird, if I enter incorrect credentials, I just get an error saying "user authentication failed", but the program stays connected to Ford. As soon as I enter in my actual credentials it says "cannot reach FDRS servers" and the little connection icon in the bottom right goes red. Then it won't go green again until I reboot the program.
Same issue. User authentication failed, please establish an internet connection and try again, etc.
This happened to me once and reinstalling fdrs is what fixed it. Call customer support. Just don't know if they'll be open tomorrow, so you may have to wait until Friday. They may give you another license due to the issues with this one.
