ECU module programming guide using FDRS

[Jesse-Infotainment]

Anyone else with a ‘21 job 1 power boost notice their “Power Flow” screen is now gone? Was it replaced by Alexa or was it removed when I added the HVAC temps or enabled the unreal engine?

You ran teh gateway update but it didnt reconfigure for the update.

You need to run a config on the gateway module.. Tell me whne youre done. The HCL has a new AS build and you are still on the old one

Sponsored

 

[abd79]

You ran teh gateway update but it didnt reconfigure for the update.

You need to run a config on the gateway module.. Tell me whne youre done. The HCL has a new AS build and you are still on the old one

Gateway was updated via OTA and APIM was forced. Is this still the case and I need to run a config on the GWM?

 

[Jesse-Infotainment]

Yeah. run the config on the gateway..

 

[abd79]

Yeah. run the config on the gateway..

Doing it now.

I also noticed when exiting camera in motion views I get the “Certain features have been disabled while in motion” pop up. Could this be related as well?

 

[Jesse-Infotainment]

Doing it now.

I also noticed when exiting camera in motion views I get the “Certain features have been disabled while in motion” pop up. Could this be related as well?

COULD BE. i DONT KNOW WHY YOUR CNFIG DIDNT UPDATE BUT IT SHOULD HAVE.

 

[abd79]

COULD BE. i DONT KNOW WHY YOUR CNFIG DIDNT UPDATE BUT IT SHOULD HAVE.

So when I try to run the config I get an “Unsuccessful” message with it stating it can’t communicate with the VCM but a network scan works fine.

 

[Jesse-Infotainment]

So when I try to run the config I get an “Unsuccessful” message with it stating it can’t communicate with the VCM but a network scan works fine.

Ok weird. SOmone was having that same issue the other day. I have no idea what the solution is. It seems to be somethign with the mongoose and FDRS. This version.. What version are you at?

 

[ksimon123451]

Doing it now.

I also noticed when exiting camera in motion views I get the “Certain features have been disabled while in motion” pop up. Could this be related as well?

I am getting the same message, and only 1 view while in motion. My Bluecruise also says it expires 10/12/2022

 

[abd79]

Ok weird. SOmone was having that same issue the other day. I have no idea what the solution is. It seems to be somethign with the mongoose and FDRS. This version.. What version are you at?

33.5.3

 

[BlackSheep]

You ran teh gateway update but it didnt reconfigure for the update.

You need to run a config on the gateway module.. Tell me whne youre done. The HCL has a new AS build and you are still on the old one

I'm also missing the Power Flow button on My 2021 Job2 Powerboost.

 

[Jesse-Infotainment]

I'm also missing the Power Flow button on My 2021 Job2 Powerboost.

Ok, Let me look into it.

 

[Jesse-Infotainment]

If anyone with a powerboost please tell me if youre missingthe Power Flow

 

[zacko11288]

I am getting the same message, and only 1 view while in motion. My Bluecruise also says it expires 10/12/2022

Blue Cruise expiration date is on the most current one it's actually December 10th, it's European formatted.

 

[ksimon123451]

Blue Cruise expiration date is on the most current one it's actually December 10th, it's European formatted.

Ok great thank you.

 

[BHunted1]

nope, but it wasn’t working prior to the update either.

it’s removed from Ford Pass completely now though.

Still on mine. Never lost it.

Sponsored