Am I having a mandela effect?

[speedracercjr]

If Im reading correctly. 3.2.1 (which according to Wikipedia is for the mach e) released Friday. Thats about when this started

Our trucks haven't gotten those updates yet, the highest we've had is 2.8.3

Sponsored

 

[CarbonizedBrandon21]

Them I'm looking at the wrong location. Where is that # located if you don't mind showing me?

 

[speedracercjr]

Them I'm looking at the wrong location. Where is that # located if you don't mind showing me?

If you are looking at https://en.wikipedia.org/wiki/Ford_Power-Up_Version_History you are looking at the right place. It's just that F150's have not received anything higher than 2.8.3 that's all. Mach E's and the Lightnings have, just not us.

Edit - I know it says F150 on the list for the higher versions, but nobody has reported it on this forum and people are always VERY quick to report new updates.

 

[CarbonizedBrandon21]

If you are looking at https://en.wikipedia.org/wiki/Ford_Power-Up_Version_History you are looking at the right place. It's just that F150's have not received anything higher than 2.8.3 that's all. Mach E's and the Lightnings have, just not us.

Thanks for the quick reply. I actually mean where can I see on my truck the current "power up" I have

 

[hmiller320]

The whole time you've owned the truck it hasn't? Mine WAS working. Atleast I think it was. LOL. Maybe I'm thinking of my last truck. But I could have sworn in the last 2 weeks I've owned it I've seen that camera automatically turn on

Correct, it hasn’t worked in the 22 at all. I just wrote it off as the 22 coming from the factory with a software update the 21 never updated OTA. Not a huge issue in the grand scheme of things so I didn’t think too much of it but now I’m thinking it might at least be worth a call to my service department.

 

[CarbonizedBrandon21]

I like the feature because it does make parking this thing easier

 

[Handle]

Use to work in my ‘22 as well and now all I see is the diagram

 

[TJE]

when I parked my truck last night the camera still came on when I got close enough to the garage door.

 

[AAWhyte]

Mine is not working as well. I thought something was different Friday when I pulled into the driveway. I usually use the sensors and the front camera to park up close to the garage door. Now all I am getting is the parking sensor screen and that's it? I know it worked this past week but stopped working sometime in the past 4-5 days.

 

[CarbonizedBrandon21]

Mine is not working as well. I thought something was different Friday when I pulled into the driveway. I usually use the sensors and the front camera to park up close to the garage door. Now all I am getting is the parking sensor screen and that's it? I know it worked this past week but stopped working sometime in the past 4-5 days.

This is too coincidental. What changed on Friday for multiple trucks to lose it..

 

[Zengineer]

I like the feature because it does make parking this thing easier

I have a Lariat 502A and park in my garage. It's a side entry so with the 157 WB I need to do a 3 point turn to easily pull straight in and hugging the RH side of a 2 bay door. I have plenty of room in front but like to pull in only far enough to allow the door to clear the trailer hitch.

Since I was in reverse just before pulling in the rear back up camera let's me see just when the hitch is beyond the shadow line left by the door seal...except if there is a 5 gallon bucket or some other thing within 2 feet of the front that triggers the front sensors and changes the camera view at the worst possible time. So yes I have it and no I don't like it.

 

[hotrodmex]

Thanks for the quick reply. I actually mean where can I see on my truck the current "power up" I have

You can only tell by the SYNC Version in you vehicle settings, or on your vehicle dashboards on ford.com. As a 22 it'll probably be 4.0.22012

The issue here is as a 22 you are not in tandem with the 21s. There are features already on the 22 that 21s are still being updated to. For instance some of these updates are barely adding the Alexa built in, but my March 22 build had it from the start. Same with Cameras at speed. EDIT: Meaning a 21 with the same updates as a 22 will be a different (looks like higher) number. There has not been a power-up for 22s yet.

Also, the Wikipedia article really only has info from the Mach-E and F-150 Lightning. I haven't seen a repository for the updates from ICE F-150 owners.

 

[Cincy150]

I'm up to 2.8.3 I believe on my 2021.. my camera still comes on automatically when the sensors are tripped.

 

[antho]

If you have Forscan, Look at 706-16-01 xxx*-xxxx-xxxx
If you know your factory data, see if its the same at this line or if it changed.

 

[hotrodmex]

March 22 build, still have cams pop up with front sensor detection. Use them every time I park at work.

@CarbonizedBrandon21 did you follow up on the DTCs?

Anyone else missing the cams scan their DTCs with FORscan?

Sponsored