Adaptive Head Lights - Coming to the US???

[dolsen]

It's the full harness. Auto levels on startup. HCM is installed.

What did you do for your HCM values? I just found a similarly equipped truck to mine that also had the projectors, and I was going to just dump in those as-builts, minus the VIN of course

Sponsored

 

[Treich560]

What did you do for your HCM values? I just found a similarly equipped truck to mine that also had the projectors, and I was going to just dump in those as-builts, minus the VIN of course

I just entered in the programming that came with the harness. You can load the vin into the hcm. It is not necessary though.

 

[Treich560]

What did you do for your HCM values? I just found a similarly equipped truck to mine that also had the projectors, and I was going to just dump in those as-builts, minus the VIN of course

The glare free works on my xlt. Yes!!!!!

 

[dolsen]

The glare free works on my xlt. Yes!!!!!

Wha my changes did you have to make to get the glare free working? IIRC you were having issues getting that going

 

[Treich560]

Wha my changes did you have to make to get the glare free working? IIRC you were having issues getting that going

I forgot to enter the top two sum of numbers. I was in a hurry lol that part enables the menu option. Once I entered those. It added the option in the settings. It was working before those sums had been added though. I noticed it this morning. It has a much smoother transition. Not on and off like the auto high beams. Lights up full high beam on the passenger side while the driver adjusts to the oncoming traffic. Such an awesome feature ?

 

[FlJohn82]

Shoutout to: @tonesto7 and @Livnitup for paving the way.


Glare Free Menu (replaces Auto High beam) in APIM:
7D0-09-01 x1xx xxxx xx- -
7D0-09-03 xxCx xxxx xx- -
Note: a module reset in FORScan or power cycle is required for the menu to appear.

IPMA
706-01-01 xxxx xxx9 xx- -

SCCM
724-04-01 xxx4 xxxx - -

IPC
720-01-01 xx8x xxxx xx- -
720-10-01 xxxx xxx3 xx- -

HCM
734-01-01 xxxx xx01 xx- -
734-01-02 x3xx xxxx xx- -

Short bed No onboard scales / ccd
734-01-04 xx53 4E- -

Short bed with scales / ccd or Raptor
734-01-04 xx56 D1- -

Long bed no scales / ccd
734-01-04 xxD9 88- -

Long bed with scales / ccd
734-01-04 xxDC 17- -

Hello. Thank you for posting this. I do have a couple questions as I am new to Forscan.
How do I know which version of truck I have (short bed with or without scales? 21 Powerboost Lariat 501 package. I have the adaptive LED headlights.
Second question, I managed to complete everything up until HCM. For example, under (734-01-01 xxxx xx01 xx- -); my settings are 734-01-01 {0111} {0102} {0052}. Are the instructions stating to change the numbers listed to 734-01-01 {011} {0101} {0052}? meaning, the X means to leave current number and only change the value from 0102 to 0101?

 

[dolsen]

Hello. Thank you for posting this. I do have a couple questions as I am new to Forscan.
How do I know which version of truck I have (short bed with or without scales? 21 Powerboost Lariat 501 package. I have the adaptive LED headlights.
Second question, I managed to complete everything up until HCM. For example, under (734-01-01 xxxx xx01 xx- -); my settings are 734-01-01 {0111} {0102} {0052}. Are the instructions stating to change the numbers listed to 734-01-01 {011} {0101} {0052}? meaning, the X means to leave current number and only change the value from 0102 to 0101?

Do you have the scales that tell you how much weight is in the truck? Do you have the CCD dampers? Both of those are individual options, they aren’t necessarily part of a package. If your truck is an FX4 you certainly won’t have CCD and I don’t think you can have the scales either, but I could be wrong on that second one.

 

[redline]

Do you have the scales that tell you how much weight is in the truck? Do you have the CCD dampers? Both of those are individual options, they aren’t necessarily part of a package. If your truck is an FX4 you certainly won’t have CCD and I don’t think you can have the scales either, but I could be wrong on that second one.

I have fx4 and scales

 

[FlJohn82]

Do you have the scales that tell you how much weight is in the truck? Do you have the CCD dampers? Both of those are individual options, they aren’t necessarily part of a package. If your truck is an FX4 you certainly won’t have CCD and I don’t think you can have the scales either, but I could be wrong on that second one.

My truck is a Fx4 and I am not aware of a way to show weight in the bed so I’m assuming I do not have the scales.

 

[dolsen]

My truck is a Fx4 and I am not aware of a way to show weight in the bed so I’m assuming I do not have the scales.

You could also check the window sticker, it’ll say on there

 

[ROBB1]

Hello. Thank you for posting this. I do have a couple questions as I am new to Forscan.
How do I know which version of truck I have (short bed with or without scales? 21 Powerboost Lariat 501 package. I have the adaptive LED headlights.
Second question, I managed to complete everything up until HCM. For example, under (734-01-01 xxxx xx01 xx- -); my settings are 734-01-01 {0111} {0102} {0052}. Are the instructions stating to change the numbers listed to 734-01-01 {011} {0101} {0052}? meaning, the X means to leave current number and only change the value from 0102 to 0101?

Based on the OEM values you have in 734-01-01 you have a Short bed no scales or CCD.

Yes leave the current value everywhere you see an X. Only change the position where a different value is listed. Looks like you are on the right track: 0102 change to 0101.

 

[Handle]

@FlJohn82 is your ‘21 Lariat a 501 pkg?

501a pkg has LED headlamp reflector

502a has LED projector

the Glare free option requires projectors

 

[FlJohn82]

Based on the OEM values you have in 734-01-01 you have a Short bed no scales or CCD.

Yes leave the current value everywhere you see an X. Only change the position where a different value is listed. Looks like you are on the right track: 0102 change to 0101.

Thanks a ton everyone.

 

[mikey1299]

Tried this on my headlight swapped xlt. No luck yet. Auto high beams are still in the menu. No option for glare free yet. Not sure it's possible?

What are all the parts needed to do this?

 

[Treich560]

What are all the parts needed to do this?

Headlights/Adapter Harness with the HCM. Forscan programming

Sponsored