50/50 view cam at speed help

[DK4]

Do you access the view by pushing the camera button and then choosing the view? That’s very cumbersome for lane changing imo. ??‍
edit* perhaps the button remembers your last view.

Don’t confuse this with turn signal cams. With that feature, the side cam comes on for whichever side you have the signal on.

In other words, 50/50 is not necessarily meant for changing lanes.

Not sure about remembering the view but yes you tap the button for it.

Sponsored

 

[Samson16]

Don’t confuse this with turn signal cams. With that feature, the side cam comes on for whichever side you have the signal on.

Is that a Lariat and above feature? My 302A has 360 cameras but does not have turn signal activated views.

 

[DK4]

Is that a Lariat and above feature? My 302A has 360 cameras but does not have turn signal activated views.

I’m not 100%, but I think if you do have 360 cams, it would work. However, at this point, you need the latest IPMA update for that to work at all. That update is only available with FDRS for now.

 

[filasb]

Yes. All these are available while in motion. Now if someone can figure out 360 in motion faster than 6 mph that would be awesome.

I had 360 while in motion (used it many times on the highways and don't recall doing any Forscan changes for it previously) on my '21 until I just completed my FDRS updates. Now, I lose 360 after 6mph.

 

[ProHERO]

I had 360 while in motion (used it many times on the highways and don't recall doing any Forscan changes for it previously) on my '21 until I just completed my FDRS updates. Now, I lose 360 after 6mph.

I still haven’t been able to find anything on the Forscan sheets that would enable 360 at speed. One option I saw was off road views at speed in the APIM. If I get around to renewing my Forscan subscription I may give that a try.

 

[aviator]

This is interesting, does anyone know if this overrides the bed camera at speed or can you switch between the two?

Sponsored