2021+ F-150 FORScan List / Database / Spreadsheet

[KuwaitiFordMan]

What happened to the Ford Performance / Raptor splash screen? I no longer see it listed.

did u find a way to enable the ford performance logo yet?

Sponsored

 

[2022Bruce_L]

did u find a way to enable the ford performance logo yet?

Honestly I forgot all about it in the hopes that Ford Performance would offer an updated splash screen for the FP700 with like a "F-150 Ford Performance" theme.

 

[NickT_]

did u find a way to enable the ford performance logo yet?

If you go to 7D0-03-01 xxxx-**xx-xx— it shows you all the splash screens available on the spreadsheet.
*03 is for Raptor

 

[KuwaitiFordMan]

If you go to 7D0-03-01 xxxx-**xx-xx— it shows you all the splash screens available on the spreadsheet.
*03 is for Raptor

lmao it was infront of me this whole time in the sheet DOC

thanks nick

 

[MoodSwing]

Was playing around the adaptive learning stuff with FORScan to try and clear some driving learned previously and now I have an Adaptive Steering Fault with a steering wheel lit up on my dash. I have no idea what I did so I guess I’ll have to restore one by one until it goes out.

 

[2022Bruce_L]

Was playing around the adaptive learning stuff with FORScan to try and clear some driving learned previously and now I have an Adaptive Steering Fault with a steering wheel lit up on my dash. I have no idea what I did so I guess I’ll have to restore one by one until it goes out.

Noted should always save previous settings before making changes. If this is just taking a pic with your cell phone so you can change back as needed. Best practices.

 

[Static]

You can go into your drivers assist menu and turn lane keeping on and off if your vehicle is equipped. I believe it you toggle normal cruise control it will turn off lane keeping.

On my base xl I cannot turn it completely off, I can only change modes (aid vs alert) and sensitivity.

 

[farmtruckman]

Another doozy for me. When I change radio stations, there is an information banner that pops on the status bar showing the new radio station but the color of this banner is completely off from the theme. Anyone has fixed this? The same thing happens when I start the truck and I get the welcome message "Welcome NAME". Screenshots below:

This is the theme without the information banner on the status bar:

The status bar with the change message banner at the top (took a couple of photos so the color difference can be seen):

I will try to click some photos later this evening so the photos are clear and the color change is clearly seen.

BUMP! Uploaded some new screenshots where the color difference and the odd alignment is seen.

 

[fordtruckman2003]

BUMP! Uploaded some new screenshots where the color difference and the odd alignment is seen.

Did you turn on a special theme or something?
Some here use unreal or something like that.
I don't think mine is doing like you show in pic.

 

[farmtruckman]

Did you turn on a special theme or something?
Some here use unreal or something like that.
I don't think mine is doing like you show in pic.

Yes sir, I do have the unreal theme switched on but this happened even with the stock dark/light themes.

 

[MoodSwing]

Does anyone know how to turn this off with forscan?

 

[Bporourke2]

Is there a way to change the splash screen in the instrument cluster? I changed the one on the sync screen but the cluster I can’t seem to find a way to change

 

[SilverPigeon]

Not that I'm aware of, but you can turn it off:

720-07-01

xxxx

xxxx

*x--

Mexico (M) • Splash Screen (SS) • Background (B) • DO NOT USE (DONOTUSETPMSPPD)

 

[WTFover]

Hey guys, I have a headscratcher I was hoping to get a little help on. I bought a set of mirrors off marketplace with the turn signals and puddle lamps. My truck is a 24 XL RCSB. The mirrors were off a 23 truck and were removed for a set of Tow mirrors. I made the changes to the Passenger Door module to enable the puddle lamps and the turn signal lamps. Works great. I then made the same changes to the driver's side module and the changes don't seem to have any effect. Everything else still works on the new driver's mirror such as blind spot indicator, and mirror moves when commanded. I have reset the DDM back to factory, and then tried re-applying the changes with no success. Can anyone think of a reason only one side would work and not the other? It seems illogical that both the puddle and turn indicator on the drivers mirror would be faulty given their age and condition. Here are the parameters I changed on both lights:

740/741-03-04

x*xx

xxxx

xx--

and

740/741-04-07

x*xx

xxxx

xx--

Does Anyone have an idea of what could cause this?

 

[SilverPigeon]

@WTFover , at this point I would test operation of the indicators/puddle by physically connecting to the passenger side. If the hardware tests ok, there may be other config issues (type = bulb/LED etc.) to go through.

Sponsored