14th Gen Console LID Fix (3D Print Solution) - Not a nickle....!

[dykzeulb]

Cura didnt love the file either, I hate to be demanding but could you try to re-upload to thingaverse or post the .stl here?

Would love to get this printed for sure!

Going to work on it tonight!

Sponsored

 

[Jeff1024]

Going to work on it tonight!

Perfect if we can make this happen I wouldn't mind printing a few extra sets for people on here that don't have access to a printer.

We can figure something out with shipping for those who may be interested.

 

[Administrator]

Going to work on it tonight!

.STL files can be directly attached / uploaded to posts. Thanks for sharing!

 

[astro_fusion]

Here's the stl, you need 2

 

[dykzeulb]

.STL files can be directly attached / uploaded to posts. Thanks for sharing!

Awesome! Maybe a new Forum topic for us geeks?

 

[MuellerNautique]

The sliding piece is a godsend as well! I went with a full tray from Amazon as even with the pieces it still slid a few mms and made that annoying clunk

on mine I got a second tray from Amazon with a hole for cables to pass through, mainly for my apple watch charger. I also like that with both trays (or a full tray) passengers or parking attendants can’t see my handgun.

 

[flixden]

This is awesome!! ?
Does anybody have the link for the console tray sliding solution also? Would be great, and thanks a lot in advance!!

 

[Jeff1024]

This is awesome!! ?
Does anybody have the link for the console tray sliding solution also? Would be great, and thanks a lot in advance!!

I was able to find this one. As designed in this .stl It was about 3/8in too long on the X axis to fit in my 2022.

I scaled the X axis only 91%, leaving the other dimensions the same, and it fit well.

If you find one that fits better let me know, but this worked for what it is.

The attached .stl is the original so you will need to scale it in your slicer of choice.

 

[SlammedZero]

This is interesting. Definitely more "stock" than having some nickels stuffed in there

 

[BarryT82]

https://www.printables.com/model/789954-f150-center-console-coin-tray-stop

 

[Carnious]

Generally interested in what issue we are trying to solve here?

 

[Brent@ANParts]

Well done, I love that you're sharing it for free, too. Might need to dust off the ol' Bambu printer now.

 

[moritzes]

Generally interested in what issue we are trying to solve here?

Trick to keep center console lid from slamming shut when you don't want it to.

See discussion and video in this thread:
https://www.f150gen14.com/forum/threads/work-station-lid-spring-weak.40446/#post-685745

 

[SlammedZero]

Found a co-worker who can print these for me. Are you guys using just 2 of them, or 4? I thought I saw someone put 2 on the top spring and 2 on the bottom?

 

[Jeff1024]

Found a co-worker who can print these for me. Are you guys using just 2 of them, or 4? I thought I saw someone put 2 on the top spring and 2 on the bottom?

Just takes two as far as I know. I printed some last week and truthfully havent gotten around to installing them yet...a good reminder I need to go do that.

Sponsored