What did you do TO your F-150 today? 🙋🏻‍♂️

[sbi]

Paint matched my textured black parts!

Looks good!
What color is it? It looks like Space White on the truck but the parts look grayish.
I assume you used spray paint, where did you get it? The only paint Ford has is a touch-up pen.

Sponsored

 

[fordtruckman2003]

I would assume the gray is primer.
"Touchup direct" has give me good paint matches in the past for other vehicles.

 

[SpaceWhiteF150]

Looks good!
What color is it? It looks like Space White on the truck but the parts look grayish.
I assume you used spray paint, where did you get it? The only paint Ford has is a touch-up pen.

Yes grey is the primer! For color I used an aerosol can from scratcheshappen.com.

All the products are listed on my build thread!

 

[mazeppa]

Made a steering wheel spinner knob for my F150 from a motorcycle engine guard light mount (had this lying around for a long time and finally found a use for it.) and a new tractor/forklift steering knob. It took me a couple of hours and some spare parts to get them to mesh together, would have been easier to have just purchased a steering knob kit, but that's not how I do things.

https://www.amazon.com/dp/B08CRQMRG2?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[sbi]

Yes grey is the primer! For color I used an aerosol can from scratcheshappen.com.

All the products are listed on my build thread!

How is the color match?

Pardon my ignorance - where do I find your build thread?

 

[fordtruckman2003]

How is the color match?

Pardon my ignorance - where do I find your build thread?

https://www.f150gen14.com/forum/threads/space-white-build.9227/page-10#post-365081

 

[9663mu]

Decided I was wanted decals on again. Got these a pair for $15 Amazon

 

[SpaceWhiteF150]

How is the color match?

Pardon my ignorance - where do I find your build thread?

It was posted below.

 

[sbi]

It was posted below.

Thank you!

 

[kb2755]

Yesterday I had to remove my Husky wheel well liners. They've warped inwards pretty badly towards the inside of the tires and after hitting a good bump while driving yesterday, got the driver side one wedged above the tire with significant rubbing. Had to pull over a number of times to try to bend them back before I got where I was going. Good thing my destination had a 10mm socket because I ripped them off immediately. Going to be contacting Husky today, very disappointed in how these have deformed.

 

[FrankThompson]

Yesterday I had to remove my Husky wheel well liners. They've warped inwards pretty badly towards the inside of the tires and after hitting a good bump while driving yesterday, got the driver side one wedged above the tire with significant rubbing. Had to pull over a number of times to try to bend them back before I got where I was going. Good thing my destination had a 10mm socket because I ripped them off immediately. Going to be contacting Husky today, very disappointed in how these have deformed.

That's odd. I've had 2 sets on as many trucks in FL (Where it tends to get a bit toasty) and haven't noticed any deformation like that. Husky is great about their customer service so I know they will take care of you. Hopefully it was just a one off issue.

 

[fordtruckman2003]

Yesterday I had to remove my Husky wheel well liners. They've warped inwards pretty badly towards the inside of the tires and after hitting a good bump while driving yesterday, got the driver side one wedged above the tire with significant rubbing. Had to pull over a number of times to try to bend them back before I got where I was going. Good thing my destination had a 10mm socket because I ripped them off immediately. Going to be contacting Husky today, very disappointed in how these have deformed.

I can see that happening in Arizona recently, but not Canada. ?

 

[kb2755]

That's odd. I've had 2 sets on as many trucks in FL (Where it tends to get a bit toasty) and haven't noticed any deformation like that. Husky is great about their customer service so I know they will take care of you. Hopefully it was just a one off issue.

I can see that happening in Arizona recently, but not Canada. ?

Honestly I’m not sure. I do recall them being a little warped upon receiving them, but they’ve never been a problem until now. Seems to have just gotten worse over time.

We’ll see 30c+ temps here in the summer. Super humid and gross.

 

[2022Bruce_L]

Did some garage therapy after work yesterday and detailed it.

 

[Highway 11]

Yesterday I had to remove my Husky wheel well liners. They've warped inwards pretty badly towards the inside of the tires and after hitting a good bump while driving yesterday, got the driver side one wedged above the tire with significant rubbing. Had to pull over a number of times to try to bend them back before I got where I was going. Good thing my destination had a 10mm socket because I ripped them off immediately. Going to be contacting Husky today, very disappointed in how these have deformed.

So I was on the fence with how much salt and crap the MTO dumps onto the roads in the winter, but I think you've convinced me not to get these.

Sponsored