ECU module programming guide using FDRS

[dzacco]

I can do it now. Message me.. I have to remote in via teamviewer.

Jesse,
Is there an option to use the Canbus method? I predict I'll be in the same boat in a couple hours.
Strange thing happened as the IPMA update was finishing, FDRS just shut down without notice. I rebooted everything and a bunch of new module updates appeared including the GWM.

Sponsored

 

[Jesse-Infotainment]

Jesse,
Is there an option to use the Canbus method? I predict I'll be in the same boat in a couple hours.

Yes. There is

Did your ipc update show?

 

[dzacco]

es it did complete but now there's another IPMA update. I tried the GWM but it was unsuccessful. There is now a TCU update, would that be a priority?

 

[Jesse-Infotainment]

es it did complete but now there's another IPMA update. I tried the GWM but it was unsuccessful. There is now a TCU update, would that be a priority?

Send me your vin so I can take a look at everything

 

[dzacco]

Send me your vin so I can take a look at everything

1FTFW1EDXMFB20692

 

[Jesse-Infotainment]

1FTFW1EDXMFB20692

We need to do your ipc before you go any further.

We will have to side load it.

 

[dzacco]

We need to do your ipc before you go any further.

We will have to side load it.

it's on the camera module now. Should I wait until it's done? Can you side load two at a time?

 

[Jesse-Infotainment]

it's on the camera module now. Should I wait until it's done? Can you side load two at a time?

No wait for it to finish and then message me and we will get together

 

[MDPE]

Can someone let me know what modules I am behind on for updates? VIN 1FTEW1E8XNFB90306

 

[Static]

I'm in the middle of updating my tcu via can bus because the USB update kept giving me a "0" error. I was able to complete several other updates but it looks like my truck is way way behind. It says my apim and gwm are current, but I'm guessing I'll have some more updates for those if this tcu ever updates. I tried making sure my USB drive is mbr formatted but it didn't seem to help. If this can bus fails again, what are my options? Vin is 1FTEX1EPXMKD97871 if anyone wants to check.

Big thanks to @bryce600rr for letting me borrow his mongoose. Very cool of him to offer that.

 

[bryce600rr]

I'm in the middle of updating my tcu via can bus because the USB update kept giving me a "0" error. I was able to complete several other updates but it looks like my truck is way way behind. It says my apim and gwm are current, but I'm guessing I'll have some more updates for those if this tcu ever updates. I tried making sure my USB drive is mbr formatted but it didn't seem to help. If this can bus fails again, what are my options? Vin is 1FTEX1EPXMKD97871 if anyone wants to check.

Big thanks to @bryce600rr for letting me borrow his mongoose. Very cool of him to offer that.

You’re very welcome. The usb should be formatted in exfat format. Maybe mbr is the same ??‍ I’m not very familiar with all that lol

 

[ronaldfreemanjr]

I just received another GWM in FDRS after 4.2.2. Anyone else?

 

[adt1982]

I'm now on 23031 rev 713. There's another GWM update.

 

[Jesse-Infotainment]

I just received another GWM in FDRS after 4.2.2. Anyone else?

Yeah.. that is correct.

 

[Static]

Well that was a waste of 6 hours

Sponsored