2021+ F-150 FORScan List / Database / Spreadsheet

[zacko11288]

Yes. A Forscan edit. Perhaps the easiest edit ever with a simple "1" entered into a string, if memory serves. Although my old man memory doesn't remember which line.

It's gotta be posted recently.

7D0-02-03

XXXX XXX1 XXXX

Sponsored

 

[TJSparky]

Yeah I see now this boot animation is from the Lightning; sorry for posting like it was something not seen before but I truly hadn't seen it. I also tried some other hex values there beyond the 24hex for the 75th anniversary one but didn't find anything else. I'll look a little more before moving on with that.

I did try several other things like adding Drive Modes to the Features screen and while they did display and would react to the selection of the Drive Mode physical knob, the individual drive mode couldn't be chosen with a tap on the screen. Anyways, now that the weather is cooling off here I will get out in the truck more to experiment and will post anything interesting that is found.

Very Cool. Good find. I just added it to my 2021 Job 1!

 

[jflottawa]

I have to ask, 'cause the thread flies quickly and I want to make sure I'm smart when I reach out to dealer... The latest updates for a '22 job 2 would be 22228?

TIA!

 

[Snakebitten]

Yes. And it's also the latest for a Job1 2021.
So it's the latest for all of us Gen14 folks. We are united.

 

[zacko11288]

Yes. And it's also the latest for a Job1 2021.
So it's the latest for all of us Gen14 folks. We are united.

I love being able to say that now ?

 

[Techno]

2022 PowerBoost F150, just set bambi mode, turned off the double honk, turned off the backup beeper / engine sound, and tried to set up cameras enabled at speed, but now I cant get to the cameras at all... Anyone have any thoughts on that one?

And on a similar note, if I didnt save the initial configuration, just after I made my changes, is there a way to get back to factory settings?

 

[GDN]

2022 PowerBoost F150, just set bambi mode, turned off the double honk, turned off the backup beeper / engine sound, and tried to set up cameras enabled at speed, but now I cant get to the cameras at all... Anyone have any thoughts on that one?

And on a similar note, if I didnt save the initial configuration, just after I made my changes, is there a way to get back to factory settings?

Go to https://www.motorcraftservice.com/AsBuilt and enter your VIN and captcha code and then download your As Built information. Your truck will report in and update those values based on the changes you made, but it takes a few days sometimes. So hope that they have not been updated yet and you can find your original values.

And of course you now know why you never make updates without a backup first.

 

[JRev]

Yes and Yes. If you want to post/message me your VIN I can confirm it for your truck.

Your truck is currently showing available updates in FDRS for: GWM, BCM, ABS and once the GWM update is done then the APIM update should pop-up. I don't see any current OTA activity for your truck.

I didn't know there were updates for these. I honestly thought only sync did updates. Sorry, I'm still very new to this FORScan stuff.

 

[Livnitup]

I didn't know there were updates for these. I honestly thought only sync did updates. Sorry, I'm still very new to this FORScan stuff.

The updates being discussed are not done in FORScan; they are done in FDRS (the software used by the dealerships' service dept) or sent to your truck via OTA (Over the Air) by Ford directly. Some people like myself have purchased the FDRS license & adapter to be able to program these updates ourselves without going to the dealership or waiting for the OTA updates.

 

[antho]

Enabling the 12" horizontal w/cards allows for the temp and fan sliders. (If you have climate bar enabled) If you enable this you will want to disable the fan and temp repeater. Thats the box that pops up. If you have both on its a bit wonky.

7D0-03-01 xxxx xxxx xA 12" Horizontal dashcards
7D0-02-01 xxxx xxx* xx-- Fan Repeater (Find your proper value)
7D0-02-01 xxxx xxxx *x-- Temperature Repeater (Find your proper value)

 

[JRev]

The updates being discussed are not done in FORScan; they are done in FDRS (the software used by the dealerships' service dept) or sent to your truck via OTA (Over the Air) by Ford directly. Some people like myself have purchased the FDRS license & adapter to be able to program these updates ourselves without going to the dealership or waiting for the OTA updates.

Ahh ok. I'm sure my stuff isn't updated. I bought the truck a few months ago and it's only been to the dealer once for an evap leak. Can I shoot you a DM with my vin # to see?

 

[Livnitup]

Ahh ok. I'm sure my stuff isn't updated. I bought the truck a few months ago and it's only been to the dealer once for an evap leak. Can I shoot you a DM with my vin # to see?

Sure

 

[cary]

Enabling the 12" horizontal w/cards allows for the temp and fan sliders. (If you have climate bar enabled) If you enable this you will want to disable the fan and temp repeater. Thats the box that pops up. If you have both on its a bit wonky.

7D0-03-01 xxxx xxxx xA 12" Horizontal dashcards
7D0-02-01 xxxx xxx* xx-- Fan Repeater (Find your proper value)
7D0-02-01 xxxx xxxx *x-- Temperature Repeater (Find your proper value)

How did you get the heated seats to show in the bottom ribbon?

 

[antho]

How did you get the heated seats to show in the bottom ribbon?

@cary
7D0-02-01 xxxx x*xx xx-- Depending on your existing value. mine was 2. Changed to A

 

[cary]

@cary
7D0-02-01 xxxx x*xx xx-- Depending on your existing value. mine was 2. Changed to A

Thank you

Sponsored