ECU module programming guide using FDRS

[ksimon123451]

Still getting in motion message after exiting the Cameras at speeds above 10mph and I was only getting rear view only. If I leave the Camera on and slow down below 5 mph then button appears to change views, I can then switch the cam view to bed view. After that the option button stays on the screen at speeds higher than 10mph and I can switch to hitch and back to bed view but as soon as I switch to rear view the button disappears.

Sponsored

 

[speedracercjr]

Finally got a chance to turn on the Unreal engine. Wow it really looks good especially in night mode. I think it's easy to see what a difference it makes at night time.

Can't for the life of me get Alexa to work, its stuck on Connected Services as Activation Pending. Tried 2 master resets, no joy. Just going to try the time method now. Here's my VIN in case you can see something I can't
1FTFW1E85MFA49677

 

[Snakebitten]

Word of caution... The "Processing requested files" portion of the APIM update in FDRS is at least a 3 Miller Lite waiting period... pre-plan accordingly!

I have an extra tablet and my phone with me in the truck. I lean the multicontour seat back a little extra. Watch a little College Football, or listen to a book, or just blather on a forum or two.
Modern life, even the most casual version, offers up lots of multitasking options. Lol

 

[BHunted1]

Finally got a chance to turn on the Unreal engine. Wow it really looks good especially in night mode. I think it's easy to see what a difference it makes at night time.

Can't for the life of me get Alexa to work, its stuck on Connected Services as Activation Pending. Tried 2 master resets, no joy. Just going to try the time method now. Here's my VIN in case you can see something I can't
1FTFW1E85MFA49677

Alexa took over night for me. Got notice this morning it was active.

 

[speedracercjr]

Alexa took over night for me. Got notice this morning it was active.

Appreciate it, still learning patience after all these years....

 

[car3452]

Pushed through todays updates. Got full screen airplay and awaiting Alexa. Anyone have an idea why I didn’t get the new splash screen? I have no other updates. Not really overly concerned just curious

 

[abd79]

Pushed through todays updates. Got full screen airplay and awaiting Alexa. Anyone have an idea why I didn’t get the new splash screen? I have no other updates. Not really overly concerned just curious

You don’t get the new splash screen with the update automatically. You need to change it to the new one using Forscan. A couple pages back Jesse has it noted.

 

[Snakebitten]

Pushed through todays updates. Got full screen airplay and awaiting Alexa. Anyone have an idea why I didn’t get the new splash screen? I have no other updates. Not really overly concerned just curious

Both the splash screen and the eye candy rendering of Sync require simple Forscan edits.

Edit: you gotta be on your toes posting in a hot thread.

 

[car3452]

Thank you for the rapid and knowledgeable response. Thank you.

 

[abd79]

Thank you for the rapid and knowledgeable response. Thank you.

Just in case you don’t see it.


75th Screen(May take several reboots to display)

7D0-03-01
XXXX 24XX XXXX

Unreal (Will Take One reset to display)
7D0-02-03
XXXX XXX1 XXXX

 

[abd79]

HVAC Interior Temps in Upper Corners
7D0-02-02
4X1X XXXX XXXX

Be careful on this one. You are adding 4 to position 0 and adding 1 to position 2.

4 and 1 are not the values to actually input and write.

 

[Paul Neubauer]

Be careful on this one. You are adding 4 to position 0 and adding 1 to position 2.

4 and 1 are not the values to actually input and write.

I am confused how this change works.

 

[TJSparky]

Be careful on this one. You are adding 4 to position 0 and adding 1 to position 2.

4 and 1 are not the values to actually input and write.

Understood, but for me original value was 0200 so 4210 is the correct setting.

 

[abd79]

I am confused how this change works.

Example:

If your current values are 1234 4321 12xx

You would change them to 5244 4321 12xx

 

[Paul Neubauer]

Word of caution... The "Processing requested files" portion of the APIM update in FDRS is at least a 3 Miller Lite waiting period... pre-plan accordingly!

*EDIT* 5 Miller Lites and counting.... This is a MASSIVE update that takes forever! I don't see how this ever could have been an OTA update unless you wanted to wait until 2023 to complete it.

Sponsored