ECU module programming guide using FDRS

[Bob_Mac]

I'm on attempt 3 getting the APIM update to take

Did you get a successful install popup or are you having a restart loop?

Sponsored

 

[nicholsbradley]

Can someone check that the updates are available to me before I go down the rabbit hole? 1FTFW1E89MFA46118

 

[tonesto7]

Did you get a successful install popup or are you having a restart loop?

restart loop

 

[Refactoringdr]

I hate to "me, too", but I would like to know if there are updates for myself. If there are updates, I can talk to my dealer (he's pretty friendly). Thanks! VIN: 1FTFW1ED0MFA88769

 

[nicholsbradley]

I hate to "me, too", but I would like to know if there are updates for myself. If there are updates, I can talk to my dealer (he's pretty friendly). Thanks! VIN: 1FTFW1ED0MFA88769

Yea I just called and the reason I was asking the guys for help. 3 different ones in Texas said they will not do them. I had to wait for OTA

 

[Bob_Mac]

restart loop

Same as me on the GWM update. Fail the update but, remove the USB stick from the USB on the truck and go the CANBUS route.. if the stick is in you won't get that option.

 

[speedracercjr]

restart loop

How's your battery voltage? That's what seemed to have stuck me in the loop which in my case was only fixed after replacing the battery.

 

[Livnitup]

Just chiming in that GWM & APIM update went smooth using VCM2 clone.

 

[Snakebitten]

Can someone check that the updates are available to me before I go down the rabbit hole? 1FTFW1E89MFA46118

See you in the hole.

 

[Bob_Mac]

Just chiming in that GWM & APIM update went smooth using VCM2.

I had success with the GWM but doing it via CANBUS, APIM now in progress so let's see how that goes. Too bad the VCM2 is no longer available...

 

[Bob_Mac]

See you in the hole.

Start with theTCU then the CCM and it'll do the CMR, PSCM and IPMA in that order... it'll tell you that multiple modules need to be installed.

 

[nicholsbradley]

See you in the hole.

thank you guess so

 

[Snakebitten]

I hate to "me, too", but I would like to know if there are updates for myself. If there are updates, I can talk to my dealer (he's pretty friendly). Thanks! VIN: 1FTFW1ED0MFA88769

You might get a pillow and blankey, because you will be spending the night in the captains chair of your mighty Powerboost. (there's a scroll bar, if you know what I mean ?)

 

[Bob_Mac]

thank you guess so

Read my reply above for the order in which to do the updates...

 

[tonesto7]

How's your battery voltage? That's what seemed to have stuck me in the loop which in my case was only fixed after replacing the battery.

It was low this morning and the GWM wouldn't begin because the voltage was low. I hooked up my charger | power-supply and it worked.
It's been connected since.

I just pulled the update and let it fail and restarted the GWM and APIM and I'm trying again

Sponsored