Wheel well liners - best ones?

[missileboy]

The only downside on the Husky's for my 2024 was they needed some trimming. Not a huge deal.

Same here. I had to trim just a tiny sliver to get the fit perfect along the fender edge. There is a molded line you clearly see, so the trimming was easy with a line to follow. I really didn't need them since I got my truck undercoated but it makes clean up easy with a hose.

Sponsored

 

[adyaro77]

Well I don't know if this will matter, but if you guys are installing remote reservoir shocks. It sounds like the Ford ones work best.

 

[skiteton]

I installed the Husky liners on my 24. It took about 10 minutes, they look great, have full coverage, and are easy to clean.

 

[pjc123]

The only downside on the Husky's for my 2024 was they needed some trimming. Not a huge deal. Didn't need to do that for the set I installed on my 2018.

Same here as well on my 2024. The trim lines where they messed up at the factory are there, so easy enough to fix with a pair of tin snips.

 

[NMMIKE]

Don't get the Rough Country ones. They aren't sized quite right so they don't stay in the fender lip and they rattle around. The Ford ones on my last truck didn't have that problem. I ripped the Rough Country ones out and painted my wheel wells with bed liner for now.

I was thinking of doing something similar, using Rustoleum rust prevention / paint product. I have a white F150 with the BAP package and I think it would look better if the wheel wells were black. And then I would still have easy access to pressure wash the undercarriage. Do U have any pics of Ur truck with the bed liner sprayed onto the wheel wells?

 

[PB2021]

Happy with the Ford liners on our 2021. I since changed the rear shocks and thankfully the liners didn’t need removal as I’ve seen with some brands in videos. They cover well but leave you access.

 

[FloridaPhil]

Well, it's a done deal! My points came out to almost $130. So I am getting these for about $90.

That's a no brainer.

I pick them up tomorrow.

 

[js312]

I was thinking of doing something similar, using Rustoleum rust prevention / paint product. I have a white F150 with the BAP package and I think it would look better if the wheel wells were black. And then I would still have easy access to pressure wash the undercarriage. Do U have any pics of Ur truck with the bed liner sprayed onto the wheel wells?

I brushed/rolled it on - just used 1 qt of Rustoleum bed liner, 4 coats per side. Apparently I didn't take any pictures, but I'll try to remember to do that and post them.

 

[Rossi6998]

I like the Ford liners. Easy to install and fit well.

 

[Kodiak]

I had my truck undercoated with black VG160 (ValuGard 160 a Cosmoline like product) and he sprayed the wheel wells. It looks great and helped reduce the price of the undercoating by not needing the liners.

 

[Bulldog]

I bought the Husky brand. Had to trim as stated. If I had to do over again, I would get the perfect fit Ford liners.

 

[FloridaPhil]

Got the Ford liners this morning. $93 and some change out of pocket.

Awesome~

 

[smoqinhill]

I have Rough Country on my 24 XLT and think they are great. No issues and cheaper than the others, plus I like the looks of them better. My dealer installed them for free so can't say if they had any issues but they didn't say they did, the fit looks and feels perfect.

 

[JohnTrigger]

I also got the Rough Country ones and they fit fine and went on easy. No rattles or issues.

 

[lurch]

I just installed Husky liners on my 2024. They fit perfect but...
The lower rear holes use those plastic push tabs that will not secure the liners to the truck.

I used a capscrew and a locknut on the two lower rear holes and it is now solid...

Hope that helps.

Sponsored