UCA question on ICON vs BDS please.

[9663mu]

Anyone know if these 2 control arms have the same fitment ?
Currently have 35x12.5 and wondering if one allows a little more room between the join and tire ? ( Icon Delta joint)
On full turn/or when articulating will one allow more clearance ?
Hope this make sense ?
Any info would be greatly appreciated. Thank you

Sponsored

 

[Hotshot Offroad]

A BDS tubular and Icon tubular are going to essentially be the same thing in terms of clearance. They use different (but similar) joints that take up approximately the same area at the spindle. "Technically" since the Icon Billet arms use the heim joints they may be able to be tucked slightly further back, but I think you're splitting hairs.

What is happening? Are you on stock wheels and 35" tires, and making contact between the tire sidewall and the UCA?

 

[mxwrk]

Fox 2.0’s (previous generation), and Camburg Billet UCA’s on my PB. No issues.

 

[9663mu]

Fox 2.0’s (previous generation), and Camburg Billet UCA’s on my PB. No issues.

Did you by any chance do a before and after to see how much lift you got ?

 

[mxwrk]

Did you by any chance do a before and after to see how much lift you got ?

Unfortunately not, but I'd estimate 2"-2.5". Truck sits basically level, maybe .5" high in the rear

Sponsored