Request VIN Lookup Thread

[Kanuck]

Very clean DTC history on your truck. These are the only codes recorded in the past 60 days:

[/QUOTE]
I did my ABS update today and the IPMA showed a DTC... But when I looked to see what it was...a huge list of characters was all I saw. Thank you sir.

Sponsored

 

[lawduck1]

I saw this in another truck I checked today and I think the same happened with his truck. Glad to hear you finally got BC!

Out of curiosity, what is my truck showing now? All up to date, or still with updates outstanding. Bluecruise is working great, which I am happy about.

 

[rugedraw]

Out of curiosity, what is my truck showing now? All up to date, or still with updates outstanding. Bluecruise is working great, which I am happy about.

I'll gladly check, but repost your VIN so I don't have to dig around for it.

 

[lawduck1]

I'll gladly check, but repost your VIN so I don't have to dig around for it.

Sorry. Here you go. 1FTFW1ED7MFA94634 I’m curious is the updated everything or just what was needed for BlueCruise. I suspect the latter, but it would be nice to know the status of things. Thank you!

 

[rugedraw]

Sorry. Here you go. 1FTFW1ED7MFA94634 I’m curious is the updated everything or just what was needed for BlueCruise. I suspect the latter, but it would be nice to know the status of things. Thank you!

I got you later when I get home from work. I do not have FDRS on my work pc.

 

[Mbarbera]

I would love to know what updates I have and any trouble codes that might have been stored. Also wondering about the heated steering wheel campaign since mine was built in the time frame. Thanks
vin 1ftfw1ed9pfb22471

 

[jcaspar]

If someone has a chance could you check to see what module updates I have available? 1FTFW1ED1MFA61340

Thanks!

 

[rugedraw]

Sorry. Here you go. 1FTFW1ED7MFA94634 I’m curious is the updated everything or just what was needed for BlueCruise. I suspect the latter, but it would be nice to know the status of things. Thank you!

All modules updated; nothing pending.

I would love to know what updates I have and any trouble codes that might have been stored. Also wondering about the heated steering wheel campaign since mine was built in the time frame. Thanks
vin 1ftfw1ed9pfb22471

DTC's being recorded are below. If your truck is fine, then don't read too much into it. THese trucks record soft codes all the time.

Modules pending updates are below. Your truck is a 2023 that was built with the older problematic software already. WHat you are missing, you will eventually get.

If someone has a chance could you check to see what module updates I have available? 1FTFW1ED1MFA61340

Thanks!

Just these:

 

[Big Cam]

Looking for any Sync updates or module updates please and thank you.
1FTEW1E83NFB08285

I recently got an update on Sync except it didn't have an update number, so I'm not sure what it was.

Thanks in advance, of course no rush.

Edit: I'm curious about this one 23-PU0327-DSP-AMP, since I recently experienced the loud static that wouldn't go away until I disconnected the battery.

 

[lawduck1]

All modules updated; nothing pending.

That’s great. Thank you so much.

 

[Raptorbert]

The last OTA you got was 4.2.1 back in June. While you are not completely up to date, your truck is getting updates which is good being a 2021. The few updates you are missing do not give you any new features, so no need to worry about it. You will get them sooner or later.

if I could bug you once more, can I ask about any active DTCs? I had an SSM done a week ago for my truck for B162F code and they said they finished it after maybe 5-10 minutes. I still see the same DTC on my forscan as “not present at time of request” Today. I’ve driven it quite a few times in the last week so I’d figure it would have cleared in its own by now. If I clear it myself it just comes back.

1FTFW1RG4MFD02571

also, so sorry about your fire. Good on the fire dept for actually naming a cause, in my area they like saying “undetermined” and letting the insurance companies handle the investigation due to potential litigation.

also also, if you don’t have a tip jar on PayPal maybe you should make one. I wouldnt mind sending you a few bucks for all the help.

thanks again

 

[Mbarbera]

All modules updated; nothing pending.



DTC's being recorded are below. If your truck is fine, then don't read too much into it. THese trucks record soft codes all the time.

Modules pending updates are below. Your truck is a 2023 that was built with the older problematic software already. WHat you are missing, you will eventually get.

Just these:

Thanks so much, so I have to wait fir the updates, unless I do it myself?

 

[pavementends]

Ah ok. If that's the case, you should be fine when they send you the 4.3.2/4.3.3 IPC updates.

On 9/19 my truck successfully received Priority Update 23-PU0724-DOM-RS, which just says "Digital Owner's Manual"...

I'm confused because this doesn't even appear in tonesto7's master list of updates at all, and I already had a digital owner's manual. Nothing else since then. Any clue what this update did or meant?

 

[rugedraw]

On 9/19 my truck successfully received Priority Update 23-PU0724-DOM-RS, which just says "Digital Owner's Manual"...

I'm confused because this doesn't even appear in tonesto7's master list of updates at all, and I already had a digital owner's manual. Nothing else since then. Any clue what this update did or meant?

That brings up your Sync to 23159. It seems like they added something to the digital owner's manual as part of the update.

If it is not on the github yet, it is because Tonesto has not updated it. If you look at the Excel sheet I have attached to the first post there, I do have the Excel sheet up to date.

 

[imarun]

Who knows, if Ford told them to start pulling parts and replacing them then you might be stuck waiting until it is reassembled.

Today after I spoke to the tech that was working on it, they returned my truck back. They said that other then the BlueCruise feature everything else should be fine. May be they put the parts back together. They are still waiting for Ford to tell them how to proceed with update.

Sponsored