Black Exhaust Tip

[nrmedic]

Oh that does look very nice with the red.
Tempting.

Its a powerboost so I wasnt tearing mess apart. Tip and done!

Sponsored

 

[dnand]

I am planning on installing mine this weekend. I'll try to record the process!

 

[mredwin25]

I just plastidipped my oem and it’s holding up extremely well

 

[Northguy]

I just plastidipped my oem and it’s holding up extremely well

U just used plastidip - no primer? Most talk about high temp engine paint. I have plastidip from doing my fender badges. May give that a try based on your experience.

 

[mredwin25]

U just used plastidip - no primer? Most talk about high temp engine paint. I have plastidip from doing my fender badges. May give that a try based on your experience.

No sir, no primer needed, clean it with dish soap and spray it, no need for high temp paint. It doesn’t get hot enough to damage the dip, mine has been like that for months now and good as the first day. Try it and please report back

 

[Northguy]

No sir, no primer needed, clean it with dish soap and spray it, no need for high temp paint. It doesn’t get hot enough to damage the dip, mine has been like that for months now and good as the first day. Try it and please report back

No sir, no primer needed, clean it with dish soap and spray it, no need for high temp paint. It doesn’t get hot enough to damage the dip, mine has been like that for months now and good as the first day. Try it and please report back

I gave it a shot with plastidip. Used glossifier as well. Pretty happy with how it turned out and it looks good on the truck. Will be interesting to see the durability but sounds like you have had good luck so far. Easy to remove the plastidip if it doesn't last.

With the exhaust tip done along with previously completed fender badges plastidipoed, ford emblems front and back vinyl wrapped, black lug nut covers and the sport decal removed the truck is done (even got vinyl wraps from Etsy to cover the airbag warnings inside on the visors!)!

Tks again.

 

[mredwin25]

I gave it a shot with plastidip. Used glossifier as well. Pretty happy with how it turned out and it looks good on the truck. Will be interesting to see the durability but sounds like you have had good luck so far. Easy to remove the plastidip if it doesn't last.

With the exhaust tip done along with previously completed fender badges plastidipoed, ford emblems front and back vinyl wrapped, black lug nut covers and the sport decal removed the truck is done (even got vinyl wraps from Etsy to cover the airbag warnings inside on the visors!)!

Tks again.

see, that’s what I’m talking about, came out great, glad I could help bud

 

[Lricaud81]

I gave it a shot with plastidip. Used glossifier as well. Pretty happy with how it turned out and it looks good on the truck. Will be interesting to see the durability but sounds like you have had good luck so far. Easy to remove the plastidip if it doesn't last.

With the exhaust tip done along with previously completed fender badges plastidipoed, ford emblems front and back vinyl wrapped, black lug nut covers and the sport decal removed the truck is done (even got vinyl wraps from Etsy to cover the airbag warnings inside on the visors!)!

Tks again.

Could you elaborate on vinyl wraps for airbag warnings. Pics if possible.
The tip looks good. Might have to try that myself

 

[fordtruckman2003]

Could you elaborate on vinyl wraps for airbag warnings. Pics if possible.
The tip looks good. Might have to try that myself

Just looking at Etsy I'm guessing something like these. I removed the warnings from my old truck which probably isn't legal somehow but it didn't bother me.

https://www.etsy.com/listing/1222793340/ford-f150raptorexpedition-2022-sun-visor

 

[Northguy]

Could you elaborate on vinyl wraps for airbag warnings. Pics if possible.
The tip looks good. Might have to try that myself

Link of one below. Lots on Etsy. They do look pretty good and match the colour well. I did consider removing the stickers but based on the amount of work to get the glue off from forum members' experience decided to try the vinyl wraps given how cheap they were. Literally 5 min of work vs over a hr estimated to get the glue off (there maybe better techniques but that is what I read on here using googone). I am pretty happy overall - would rather have been able to remove them easily but this is a good compromise. The first one I put in wasn't perfect as I learned the technique but was really happy with the other 2. I should have started with the small one first.

I can take a picture of mine if it would help. Love this forum for pass it forward approach members take.

https://www.etsy.com/ca/listing/122...150&ref=sr_gallery-1-1&organic_search_click=1

 

[Lricaud81]

Just looking at Etsy I'm guessing something like these. I removed the warnings from my old truck which probably isn't legal somehow but it didn't bother me.

https://www.etsy.com/listing/1222793340/ford-f150raptorexpedition-2022-sun-visor

Ah OK. That's kind of neat.

 

[Lricaud81]

Link of one below. Lots on Etsy. They do look pretty good and match the colour well. I did consider removing the stickers but based on the amount of work to get the glue off from forum members' experience decided to try the vinyl wraps given how cheap they were. Literally 5 min of work vs over a hr estimated to get the glue off (there maybe better techniques but that is what I read on here using googone). I am pretty happy overall - would rather have been able to remove them easily but this is a good compromise. The first one I put in wasn't perfect as I learned the technique but was really happy with the other 2. I should have started with the small one first.

I can take a picture of mine if it would help. Love this forum for pass it forward approach members take.

https://www.etsy.com/ca/listing/1222793340/ford-f150raptorexpedition-2022-sun-visor?click_key=9ef6ae1f9af0d90c2342657d0b7310c8ebca2919:1222793340&click_sum=24360821&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=visor+warnings+blackout+f150&ref=sr_gallery-1-1&organic_search_click=1

Might have to look further at different options

 

[vinnie45acp]

I installed ford mud flaps for thst reason. Brand new black corsa exhaust tip and didn't want Knicks and scratches.

Do you have more pics of this? I'm looking to go this route and curious what it looks like from behind etc.
[/QUOTE]
Did you install this on the stock exhaust? And if so, how much and what kind of modification did you have to do to make it work? Looks great, seriously thinking of doing what you did.

 

[22SpaceWhiteXLT]

I have the Ford Perf Tip and its great. Only issue is the rest of the visible exhaust is still the raw silver obviously and it bugs me when I look at it from the back. Not sure of good options to fix this. Obviously could be painted but I worry that wont hold up well.

 

[fordtruckman2003]

I have the Ford Perf Tip and its great. Only issue is the rest of the visible exhaust is still the raw silver obviously and it bugs me when I look at it from the back. Not sure of good options to fix this. Obviously could be painted but I worry that wont hold up well.

Sand it a little and spray with high temp grill paint. Should hold up fine. I've thought of doing that but not got round to it.

Sponsored