Adding Co-Pilot Assist 2.0 with Forscan?

[XLT22]

At least yours showed up. It took almost a month to get the steering wheel switch in after cancelling the harness order.

Sponsored

 

[riderryan92]

At least yours showed up. It took almost a month to get the steering wheel switch in after cancelling the harness order.

Geez,
Gotta get the buttons ordered. Will probably get that from my local dealer.

 

[JaHoova]

You don't actually need the buttons if you don't mind not being able to adjust follow distance. It defaulted to 3 bars for me and I haven't missed not being able to change it so far.

 

[dhageremtp]

Harness came today. What I ordered and what the tag says.

 

[PFXLT]

Harness came today. What I ordered and what the tag says.

labels on the parts are almost always different than what you order. does it look like it has the right connectors?

what all are you adding? CCM and front park sensors?

 

[dhageremtp]

labels on the parts are almost always different than what you order. does it look like it has the right connectors?

what all are you adding? CCM and front park sensors?

Yes. I understood that from prior posts as well. Just sharing what I can.
Yes going to add ccm and front sensors. Waiting for the sensors still.

 

[PFXLT]

Yes. I understood that from prior posts as well. Just sharing what I can.
Yes going to add ccm and front sensors. Waiting for the sensors still.

nice, i'm debating the same. are the wires there for your sensors or are you going to run them all?

 

[dhageremtp]

nice, i'm debating the same. are the wires there for your sensors or are you going to run them all?

From my search I believe everything is there. Just need the harness and hardware. Then the forscan changes. Figure if I am in there doing part of it, I might as well get it all. After all it’s what I originally had ordered before the deletes.

Also planning to replace the back harness so I can get the 7 pin connector for the trailer camera.

 

[riderryan92]

Harness came today. What I ordered and what the tag says.

I'll look for that when I pick mine up later today.
All goes well, I hope to have ACC and Lane Centering done this weekend.

 

[riderryan92]

Success! Got the right one this time. Install stars tomorrow.

 

[dolsen]

I’m lucky that my on the lot truck already was options wit CP assist, even though it’s a 501A, which it is not included, the dealer had the foresight to add it.

If I didn’t have it, I’d be one of those guys adding it for sure. I’m still contemplating attempting to add blue cruise

 

[PFXLT]

I’m lucky that my on the lot truck already was options wit CP assist, even though it’s a 501A, which it is not included, the dealer had the foresight to add it.

If I didn’t have it, I’d be one of those guys adding it for sure. I’m still contemplating attempting to add blue cruise

whats needed for the blue cruise?

 

[dhageremtp]

I’m lucky that my on the lot truck already was options wit CP assist, even though it’s a 501A, which it is not included, the dealer had the foresight to add it.

If I didn’t have it, I’d be one of those guys adding it for sure. I’m still contemplating attempting to add blue cruise

I ordered my22 with it.....but the force nav/xm delete took out CP Assist 2.0 as well.

 

[dolsen]

whats needed for the blue cruise?

I haven’t dug too dee into it yet, but as of now, on top of CP assist, I also need the IR cameras in the a pillar and dash. Also the CMR and all wiring. There’s likely more, I still need to do a lot more digging on it. I think there’ll have to be a lot of wiring run

 

[PFXLT]

I haven’t dug too dee into it yet, but as of now, on top of CP assist, I also need the IR cameras in the a pillar and dash. Also the CMR and all wiring. There’s likely more, I still need to do a lot more digging on it. I think there’ll have to be a lot of wiring run

Oh man, thats a little too much for me

Sponsored